Homelite UT43160 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
ELECTRIC POLE SAW
SCIE ÉLECTRIQUE DE MANCHE
ELÉCTRICA SIERRA DE PÉRTIGA
UT43160
ALL VERSIONS
TOUTES LES VERSIONS
TODAS LAS VERSIONES
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your pole saw has been engineered and manufactured to Homelite’s high standard for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before us-
ing this product.
Thank you for buying a Homelite product.
Cette scie de manche a été conçue et fabriquée conformément aux
strictes normes de fiabilité, simplicité d’emploi et sécurité d’utilisation
de Homelite. Correctement entretenue, elle vous donnera des
années de fonctionnement robuste et sans problème.
AVERTISSEMENT : Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre le
manuel d’utilisation avant d’employer ce produit.
Merci d’avoir acheté un produit Homelite.
Su sierra de pértiga ha sido diseñada y fabricada de conformidad
con las estrictas normas de Homelite para brindar fiabilidad, facilidad
de uso y seguridad para el operador. Con el debido cuidado, le
brindará muchos años de sólido y eficiente funcionamiento.
ADVERTENCIA: Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
Le agradecemos la compra de un producto Homelite.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS

Homelite UT43160 Specifications

General

Power Source	Gas
Voltage	Not applicable
Type	Pole Saw
Shaft Type	Telescoping
Bar Length	10 inches
Chain Pitch	3/8 inch
Chain Gauge	0.050 in

Summary

Important Safety Instructions

Read and Understand All Instructions

User must read and understand all safety instructions before operating the product.

General Operating Safety

Electrical Safety Precautions

Specific Safety Rules

Kickback Awareness and Prevention

Explains kickback and how to reduce its risk during operation.

Safe Operating Practices

Covers safe practices during cutting, stance, grip, and environment.

Electrical Line Clearance

Warns against operating near overhead electrical lines.

Electrical Information

Double Insulation Explained

Electrical Connection Requirements

Extension Cord Guidelines

Product Assembly and Unpacking

Unpacking and Parts Check

Assembly Safety Warnings

Pole Saw Assembly

Connecting the Poles

Assembly Safety Precautions

Operation Safety Guidelines

Electrical Hazard Warning

Warning against operating near power lines or electric sources.

General Operational Safety

General safety advice to maintain focus and avoid injury during operation.

Pole Saw Operation

Adding Bar and Chain Lubricant

Connecting to Power Supply

Starting and Stopping the Motor

Adjusting and Cutting Procedures

Adjusting Telescoping Pole

Preparation for Cutting

Essential preparation steps before starting cutting operations.

Basic Cutting Procedure

Step-by-step guide to cutting limbs to prevent bark damage and ensure safety.

Limbing and Pruning Techniques

Cutting Procedures for Limbs

Specific techniques for limbing and pruning, including planning and execution.

Safety During Limb Cutting

Reinforces safety measures like avoiding ladders and maintaining distance from electrical lines.

Maintenance and Servicing

General Maintenance Guidelines

Covers cleaning, care, and general upkeep of the pole saw.

Servicing Safety Precautions

Replacing Bar and Chain

Chain Tension Adjustment

Bar and Chain Replacement

Cutter Sharpening

Sharpening Techniques

Sharpening Safety Warnings

Storing and Troubleshooting

Product Storage Guidelines

Troubleshooting Common Issues

Solutions for common problems like overheating or the chain not rotating.