EN
Installation
1. Slide the device in the corresponding slot of the
garage door operator.
2. Plug the connector of the device to the garage door
operator (see the manual of the garage door
operator).
WARNING
!
Fixed Installation
The device may only be used for
fixed installations. The device must
be securely attached within a fixed
installation.
WARNING
!
Environment
The device may only be operated
in dry and dustfree environment
and must be protected from the
effects of moisture, vibrations,
solar or other methods of heat
radiation, cold and mechanical
loads.
Garage door operator
The position of the slot for the
module depends on the garage
door operator type.
Information
To Next Page
Loading...
