What to do if the Homematic IP HmIP-SK9 Control Unit displays 'Batteries empty'?
If your Homematic IP Control Unit indicates that the batteries are empty, replace them. Please refer to section 8 'Replacing batteries' on page 53 for instructions.
What to do if the Homematic IP Control Unit displays 'Battery voltage low'?
If the Homematic IP Control Unit shows a 'Battery voltage low' message, you should replace the batteries. See section 8 'Replacing batteries' on page 53 for instructions.
What to do if my Homematic IP HmIP-SK9 command is not confirmed?
If a command is not confirmed on your Homematic IP Control Unit, please try again. See sections 9.1 'Command not confirmed' on page 54 or 9.2 'Duty cycle' on page 54 for additional information.
What to do if the operating lock is activated on my Homematic IP HmIP-SK9 Control Unit?
If the operating lock is activated on your Homematic IP Control Unit, you need to deactivate it via the app.
Why is my Homematic IP HmIP-SK9 Control Unit valve drive sluggish?
If the valve drive of your Homematic IP Control Unit is sluggish, check whether the valve pin is stuck.
What to do if my Homematic IP Control Unit valve moved to error position?
If the valve on your Homematic IP Control Unit has moved to an error position, replace the batteries of the device. Please refer to section 1 'Information about this manual' on page for instructions.
What to do if my Homematic IP HmIP-SK9 Control Unit shows a test display?
If your Homematic IP Control Unit shows a test display, wait until the test display has stopped, then you can continue.
Why is the actuating range too wide on my Homematic IP HmIP-SK9?
If the actuating range is too wide on your Homematic IP Control Unit, check the fastening of the radiator thermostat.
Why is the adjustment range too small on my Homematic IP Control Unit?
If the adjustment range is too small on your Homematic IP Control Unit, check whether the valve pin is stuck.
What to do if my Homematic IP HmIP-SK9 Control Unit is defective?
Please see your app for error message and contact your retailer.
Explains how to pair the Homematic IP Radiator Thermostat directly with the Window/Door Contact.
Describes teaching devices to the Homematic IP Access Point or Central Control Unit.
Details installing the radiator thermostat onto the radiator valve without draining water.
Explains the automatic adaptation process after mounting the radiator thermostat for valve compatibility.
Guides on choosing the best position for mounting the window/door contact and magnet.
General| Product Name | Homematic IP HmIP-SK9 |
|---|---|
| Product Code | HmIP-SK9 |
| Product Type | Control Unit |
| Manufacturer | eQ-3 AG |
| Model | HmIP-SK9 |
| Communication | Wireless |
| Wireless Standard | Homematic IP |
| Power Supply | Battery |
| Radio Frequency | 868.3 MHz / 869.525 MHz |
| Radio Range | 300 m in free field |
To Next Page
