55
Troubleshooting
sion time of any device is 1% of an hour (i.e. 36 seconds in an hour).
Devices must cease transmission when they reach the 1% limit until
this time restriction comes to an end. Homematic IP devices are de-
signed and produced with 100% conformity to this regulation. Dur-
ing normal operation, the duty cycle is not usually reached. However,
repeated and radio-intensive teach-in processes mean that it may be
reached in isolated instances during start-up or initial installation of
a system. If the duty cycle is exceeded, this is indicated by one long
red lighting of the device LED (D or L) , and may manifest itself in
the device temporarily working incorrectly. The device starts working
correctly again after a short period (max. 1 hour).
9.3 Error codes and flashing sequences
Flashing code/
display
Meaning Solution
Short orange
flashing
Radio
transmission/
attempting to
transmit/data
transmission
Wait until the transmis-
sion is completed.
1x long green
lighting
Transmission
confirmed
You can continue opera-
tion.
1x long red light-
ing
Transmission
failed or duty
cycle limit is
reached
Please try again (see
sec. „9.1 Command not
confirmed“ on page 54
or „9.2 Duty cycle“ on
page 54).
To Next Page
Loading...
Need help?
General
