Homematic IP HmIP-SK9 User Manual

48
Configuration menu of the radiator thermostat
6.1
Prg
Offset
AUTO
MANU
BOOST
Mo Tu We Th Fr Sa Su
0
6
12
18
24
Automatic mode
6.2
Prg
Offset
AUTO
MANU
BOOST
Mo Tu We Th Fr Sa Su
0
6
12
18
24
Manual operation
6.7
Prg
Offset
AUTO
MANU
BOOST
Mo Tu We Th Fr Sa Su
0
6
12
18
24
Oset temperature
6.5
Prg
Offset
AUTO
MANU
BOOST
Mo Tu We Th Fr Sa Su
0
6
12
18
24
Programming a heating profile
6.4
Prg
Offset
AUTO
MANU
BOOST
Mo Tu We Th Fr Sa Su
0
6
12
18
24
Operating lock
6.6
Prg
Offset
AUTO
MANU
BOOST
Mo Tu We Th Fr Sa Su
0
6
12
18
24
Date and time
6.3
Prg
Offset
AUTO
MANU
BOOST
Mo Tu We Th Fr Sa Su
0
6
12
18
24
Holiday mode
If you connect the device to the Access Point, you can
comfortably adjust the settings via the Homematic IP app.
If you have already adjusted the settings in the configuration
menu or if you have already connected the device to another
Homematic IP device, you first have to restore the factory
settings of the device before you can connect it to a
Homematic IP Access Point or another Central Control Unit
CCU2/CCU3 (see „10 Restore factory settings“ on page 57).
6.1 Automatic operation
In automatic mode, the temperature is controlled in accordance with
the set heating profile. Manual changes are activated until the next
point at which the profile changes. Afterwards, the defined heating
profile will be activated again. To activate the automatic mode, please
proceed as follows:
• Select “Auto” via the plus and minus buttons (E and F) in the menu.
• Confirm with the menu button.
To confirm, the symbol flashes twice and the device changes back to
automatic mode.

Homematic IP HmIP-SK9 Specifications

General

Brand	Homematic IP
Model	HmIP-SK9
Category	Control Unit
Language	English