Need help?Do you have a question about the HomeMatic HM-PB-2-WM55 and is the answer not in the manual?
General| Category | Remote Control |
|---|---|
| Manufacturer | eQ-3 |
| Model | HM-PB-2-WM55 |
| Type | Wireless Push Button |
| Frequency | 868.3 MHz |
| Battery Type | CR2032 |
| Number of Buttons | 2 |
| IP Rating | IP20 |
| Range | 100m (open field) |
| Battery Life | Approximately 2 years |
| Operating Temperature | 0°C to +55°C |
Lists the components included with the push button device for installation.
Details the process of mounting the device using adhesive strips.
Explains the procedure for installing the device using screws.
Covers integrating the push button into multi-gang frames from other manufacturers.
Provides instructions on how to replace the batteries in the electronic unit.
Explains the process of teaching the push button to communicate with actuators.
Describes the meaning of different LED flashing patterns for status feedback.
Details the steps to perform a factory reset on the device.
To Next Page