Need help?Do you have a question about the HomeMatic HmIP-BS2 and is the answer not in the manual?
Explains the meaning of symbols used throughout the manual for warnings and notes.
Details the components of the device, such as system button and connecting terminals.
Provides step-by-step guidance for installing the device, emphasizing safety precautions.
Visual guide illustrating the physical installation steps and component placement.
Detailed steps for physically installing the switch actuator into a flush-mounting box.
Instructions on how to connect the device to the Homematic IP system via Access Point or CCU3.
Addresses issues where commands are not confirmed, listing potential causes like interference or receiver issues.
Explains the 868 MHz duty cycle regulation and its impact on device operation.
Details various LED flashing codes and their corresponding meanings and solutions.
To Next Page
General