Homentry HE60 User Manual

Montageanleitung - Garagentoröffner HE60
Instructions - Ouvre-porte de garage HE60
Instrukties - Garagedeuropener HE60
Instructions - Garage Door Opener HE60
AT/CH/DE/GB/FR/N
L
+49 (0) 1805 - 46636879
i
7,4m²
2,125m
60Kg
3
,
5m
Declaration of Conformity
The undersigned, hereby declare that the equipment specified, and all
accessories, conforms to the Directives and Standards stated.
Model:...........................................................................................HE60
89/336/EEC
73/23/EEC
1999/5/EC
EN55014-1 (2000), EN55014-2 (1997), EN61000-3-2 (2000), EN61000-3-3
(1995), EN 301 489-3 (V1.3.1), EN 300 220-3 (V1.1.1), EN60335-1 (1994),
and EN60335-2-95 (2000)
Declaration of Incorporation
A power door operator, in combination with a Garage Door must be installed
and maintained according to all the Manufacturer’s instructions, to meet the
provisions of EN12453, EN13241-1 and Machinery Directive, 89/392/EEC.
B. P. Kelkhoff
Manager, Regulatory Affairs
CWI-Electrotechnics Nederland
NL-1001ED Amsterdam
March, 2007

Homentry HE60 Specifications

General

Brand	Homentry
Model	HE60
Category	Gate Opener
Language	English

Summary

Declaration of Conformity

Model and Directives

Declares conformity to model HE60 and EU directives like 89/336/EEC.

Standards Conformance

Lists harmonized standards such as EN55014-1 and EN60335-1.

Declaration of Incorporation

Installation Requirements

Specifies installation must follow EN12453, EN13241-1, and Machinery Directive.

Important Safety Rules

Assembly Section

Assemble Rail

Instructions for connecting rail sections using braces and ensuring alignment.

Assemble Cable Pulley Bracket

Steps to attach the cable pulley bracket to the chain/cable assembly.

Insert Chain/Cable into Rail

Guide for inserting the cable pulley bracket and trolley into the rail.

Attach Trolley to Rail

Steps to connect the outer trolley to the rail assembly.

Attach Rail to Unit

Procedure for attaching the assembled rail to the main opener unit.

Attach Header Bracket

Instructions for mounting the header bracket to the wall or ceiling.

Installation Section

Find Center of Garage

Locating the center line on the garage door and ceiling for alignment.

Position Opener

Determining the correct height and placement for the opener unit.

Hang Opener

Mounting the opener unit to the ceiling using brackets.

Mount Header Bracket

Securing the header bracket to the wall, including concrete and wood options.

Fasten Door Bracket

Attaching the door bracket to the top of the garage door.

Connect Door Arm to Trolley

Linking the door arm to the opener trolley and door bracket.

Attach Limit Switches

Installing and adjusting limit switches for door travel.

Setting the Force

Procedure to calibrate the opener's force sensitivity for safe operation.

Testing and Operation

Test the Safety Reverse System

Verifies the door reverses upon contact with a 40mm obstacle.

Program Remotes

How to pair remote controls with the garage door opener receiver.

Replace Light Bulb

Instructions for changing the opener's light bulb.

Operation Of Your Opener

Explains how to activate and use the opener via various devices.

Care Of Your Opener

Routine maintenance checks and advice for the opener unit.

Having a Problem?

Troubleshooting guide for common issues with the opener.

Wiring the Lighted Door Control Button (Optional)

Install the Outside Quick Release

Replacement Parts/Accessories

Specifications