1. Always make sure flammable objects are kept at a safe distance.
2. Never use near gas, petroleum products, or other explosive substances.
3. Do not use near combustible materials such as dry grass, leaves, and paper, which can scorch and catch fire.
• DANGER
Do not operate near explosive or flammable materials unless extraordinary safety precautions are observed.
The Electrolight produces air at extremely high temperatures (as high as 1300°F) and if exposed to explosive
or flammable materials, if not avoided, will result in flame or possible explosion, causing serious personal injury,
death or property damage.
• WARNING
Do not touch nozzle while operating and until cool down is
complete. Touching hot surface can cause severe burns,
personal injury or property damage.
1. Do not touch the nozzle while ElectroLight is on. Severe burns will result. Wear gloves to protect hands.
2. Make sure ElectroLight is cool before storing.
3.
Do not leave the ElectroLight unattended. Unplug if you leave the work area.
4. The nozzle becomes very hot. Do not lay the ElectroLight on flammable surfaces while operating or after
immediately shutting off. Always set on a flat, level surface so the nozzle tip is in a safe direction.
5. Do not point ElectroLight at yourself, others or animals.
6. Never let the cord come in contact with the fire or grill.
7. Never let the cord come in contact with the hot barrel of the ElectroLight.
Hot Surface Hazard
Explosion or Flammable Hazard
C900046 ElectroLight Hot Air Fire Starter ENGLISH 4
ALWAYS READ AND UNDERSTAND THE MANUAL AND SAFE OPERATION BEFORE USE.
If you do not understand any of these points or the warnings associated with the use of this product –
DO NOT USE.
•WARNING
Do not touch nozzle when working.
Severe burns will result.
To Next Page
Loading...