Homeright Power-Flo Pro 2800 User Manual

mWARNING TO REDUCE THE RISK OF INJURY, USER
MUST READ AND UNDERSTAND INSTRUCTION MANUAL.
FOR HOUSEHOLD USE ONLY.
KEEP CHILDREN AWAY FROM WORKING AREA.
For Customer Service Call:
1-800-264-5442 or 763-780-5115
8 a.m. to 5 p.m. CST.
POWER-FLO
2800
PRO
Pistola rociadora sin
aire Power-Flo Pro
2800 1/2 HP
mADVERTENCIA PARA DISMINUIR LOS RIESGOS DE
LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL
DE INSTRUCCIONES.
SÓLO PARA USO DOMÉSTICO.
MANTENGA A LOS NIÑOS LEJOS DEL ÁREA DE TRABAJO.
Para comunicarse con el departamento de servicio al
cliente, llame al: 1-800-264-5442 o 763-780-5115
de 8 a.m. a 5 p.m. hora del Centro de los Estados Unidos.
Pistolet Pulvérisateur
sans air comPrimé
Power-Flo Pro 2800
1/2 HP
mAVERTISSEMENT POUR RÉDUIRE LES RISQUES DE
BLESSURE, L’UTILISATEUR DOIT LIRE ET COMPRENDRE LE
MANUEL D’INSTRUCTION.
DESTINÉ À UN USAGE DOMESTIQUE SEULEMENT.
TENEZ LES ENFANTS ÉLOIGNÉS DE L’AIRE DE TRAVAIL.
Pour le service à la clientèle, appelez au :
1-800-264-5442 ou 763-780-5115
8 h à 17 h, heure normale du Centre.
ENGLISH • FRANÇAIS • ESPAÑOL
1
800879 POWER-FLO
®
PRO 2800
PLEASE READ AND SAVE THIS INSTRUCTION MANUAL
Power-Flo
®
Pro 2800
1/2 HP airless sPray Gun

Homeright Power-Flo Pro 2800 Specifications

General

Maximum Pressure	2800 PSI
Flow Rate	0.24 GPM
Hose Length	25 ft
Power Source	Electric
Motor	1/2 HP
Tip Size	0.015 in
Spray Pattern	Adjustable
Type	Airless Paint Sprayer

Summary

Important Safeguards

Work Area Safety

Guidelines for maintaining a safe and hazard-free work area during operation.

Electrical Safety

Precautions to prevent electric shock and ensure safe electrical connections.

Personal Safety

Recommendations for user protection, alertness, and proper equipment usage.

Specific Safety Warnings

Crucial safety advice, including high-pressure hazards and protective gear.

Grounding

Grounded Tools with 3-Prong Plug

Explanation of how 3-prong plugs ensure grounding for electrical safety.

Extension Cords

Recommended Minimum Wire Gauge for Extension Cords

How to Use

Start Up

Maintenance and Servicing

Clean Up

Detailed instructions for flushing and cleaning the sprayer system.

Storing

Winterize and Long Term Storage

For Power-Flo Pro Pump

For the Gun and Hose

Troubleshooting

Motor will not run

Diagnosing and resolving issues when the motor fails to operate.

Low output

Troubleshooting steps for reduced paint output from the sprayer.

Sprayer starts, but does not draw in paint when in the PRIME/SPRAY knob is set to PRIME

Resolving issues where the sprayer doesn't prime correctly.

Sprayer draws up paint, but the pressure drops when the gun is triggered

Identifying causes for pressure loss when the spray gun is triggered.

PRIME/SPRAY valve set to SPRAY and flow through return tube is present

Spray gun will not spray

Irregular spray pattern