Made in China
Questions, problems, missing parts? Before returning to the store, call our customer service department at 1-877-319-3757, 7:30 a.m. - 4:30 p.m., CST, Monday - Friday.
®
E505940
BATHROOM FAN 2-FUNCTION LED WALL CONTROL SWITCH
MODEL 7150-02
READ AND SAVE THESE INSTRUCTIONS
PRODUCT SPECIFICATIONS
Voltage: AC120V/60Hz Max Power of connecting electrical appliance: AC120V/1A
Electrical Appliance Type: Electric lamp and motor type fan for home use Prevailing Ambient Temperature: 32ºF - 104ºF (0º C - 40º C)
Wiring Diagram Packaging and Hardware Contents
Ground/Green Wire
Black Wire
White Wire
Green Wire
Red Wire
Brown Wire ......................................................
LightFan
Light/Brown WireFan/Red Wire
AC120V
Power/Black Wire
Neutral/White Wire
Switch, plastic wire connectors, screws, and instruction manual.
CAUTION IMPORTANT! READ BEFORE INSTALLATION:
• For indoor use only.
• Installation Location: Wall.
• This product can be used in the bathroom with a GFCI protection circuit.
• The operating control must be grounded.
• Storage Temperature: -4ºF - 140ºF (-20º C - 60º C).
1. All electrical wiring must comply with the National Electrical Code ANSI / NFPA
70-1999 and local electrical codes. Electrical installation should be performed
by a qualied licensed electrician.
2. To reduce the risk of re or injury, do not use this product with any variable wall
controller.
3. The wrong wiring connection will damage the operating control.
PREPARATION
Tools required for assembly: Phillips screwdriver and wire stripper.
INSTALLATION STEPS
1. Connect the switch according to the wiring diagram.
2. Press the ON/OFF icon on the switch. Once the indicator light of the ON/OFF icon turns on, the switch has received the electrical connection.
3. Press the desired function icon. Once the indicator light of the corresponding function turns on, the function will start. For example, when you press the fan icon,
the fan icon indicator light will turn on and the fan will begin working.
4. Press a function icon again. Once the indicator light of the corresponding function turns off, the function stops. For example, when you press the fan icon a second time,
the fan icon indicator light will turn off and the fan will stop working.
@2020 Homewerks Worldwide, LLCHomewerks.com
To Next Page
Need help?
General
