7
• Stability Reminder: When removing the hard water tank, ensure system stability to
prevent tipping.
• Safe Usage: To prevent accidents, individuals with physical, mental, or organ
impairments and children should not use the product without supervision from
capable adults.
• Regular Filter Replacement: Maintain optimal performance by replacing the filter
element regularly, and always flush it after replacing it (Section 6.5 - Page 10).
• Extended Production Time: In colder conditions, the water tank's production time
may increase due to the membrane element's nature.
• Heating Safety: The system’s design includes instant heating, and the outer shell may
become slightly hot during use, which is normal.
• Temperature Caution: Be cautious when switching from higher temperature water to
lower temperature water, as the fresh water may still be really hot and cause skin
harm.
• Usage Altitude: This product is suitable for altitudes below 1,500 metres above sea
level, for example mountain hiking. Stop use if the inlet water temperature falls below
5°C or rises above 38°C.
• Factory Testing: Some water may escape when opening the PE bag because the
machine undergoes water testing at the factory; this is a normal occurrence.
5. MAINTENANCE
When you are ready to use the system again, please follow the initial setup and
cleaning instructions as you did during its first use.
Hommix ziRO - Instruction Manual V1.0
Machine Care During Extended Periods of Non-Use
If the product remains unused for a couple of days, we advise filling up the hard
water tank (empty before filling up if there is water inside already) and then
emptying two jugs of pure water. This is important for optimum quality of water.
If you anticipate an extended period of non-use, roughly around a week or more,
we recommend the following steps to ensure the machine's optimal condition:
• Begin by emptying both the system's hard water tank and the pure water jug.
• Disconnect the power supply to the system.
• Remove the filters from the system (Section 7.17.2 - Page 16).
• Insert the filters in sealable bags and seal it up
• Store the filters in a cool, fresh-keeping section within your refrigerator,
maintaining a temperature range of 2-5°C. Be sure not to place it in the freezer
section.
• Meanwhile, keep the system in a cool dark place, for example a kitchen cabinet
To Next Page
Loading...