Homtime V2 - User Manual

104 mm
V2(Homtime)黑/白
2020-03-11
英文说明书
120g道林纸
正反面+风琴折
A0 发行A0版图档
142.5 mm
side 1
side 2
#Please strictly follow above safety instructions, otherwise it may
lead to short circuit, electric shock, fire and other malfunction.
#If the product is not functioning properly. Please contact our
technical support team or the s authorized service provider
This product is precise. Please do not store and use under the
following conditions:
. Vibrate or shocking place.
. Direct sunlight or high temperature place.
. Wet and flooded place.
. Dusty place.
. Strong electromagnetic waves and electromagnetic force place.
. Strong static place.
. in the condition of moisture.
. Close to the radiator, electric heater,or heat generating device.
. Applicable only for in areas below 2000m above sea level.
. Applicable only for non - tropical climates.
#Please do not step on the product and the cord.
#Please consult your distributor if you have any questions
regarding the installation, operation and safety of this product,
Honored customer, thank you for purchasing our product. Please
read this manual carefully before using this product.
- 3 -
V2
Alarm Clock with Bed Shaker
TIPS / IMPORTANT:
All safety and operation instructions should be read thoroughly before
proceeding and please keep the handbook for future reference.
- 2 -
WARNING
IF YOU IGNORE SAFETY INSTRUCTIONS, ERROR MANIPUL-
ATION MAY CAUSE DAMAGE TO PERSONS AND PRODUCTS.
Safety Instructions
Read all safety instructions before using this product:
Please read this manual carefully including safety instructions,
parts instruction and operation manual before using this product.
. Install the product strictly according to this operation manual.
. Use only with Homtime-recommended attachments, accessories,
and replacement parts.
. Please do not open the decomposition of the product.
. Please use the original power cord .
. Please do not place items on the product and cord, Please do
not bend, cut off or process the cord. Please do not use with a
damaged cord or plug.
. Before cleaning the product, please disconnect the power supply
first and clean the product with dry cloth.
. Suitable for dry locations only.
. Do not use outdoors or on wet surfaces. Never locate the
product where it may fall into a bath or other water container.
. Please do not put other parts into this product.
. Please stopping using the product immediately if the product is
damaged, smell or smoked caused by improper use.
. It may cause product damage and data loss if the product has
been clashed or dropped.
. Unplug the power cord when encounter a thunderstorm or do not
use the product for a long time.
Press to adjust clock and alarm time Snooze / LED dimmable
Alarm volume Alarm time setting
Press to adjust clock and alarm time Turning off alarm
- 5 -
Top Controls
6
7
118 9
10
5V OUT
5V IN
TIME 12H/24H
Controls on the back
13 14
15 16
17
12
6
8
10
7
9
11
Battery compartment Alarm mode switch
(Buzzer/Vibration/Buzzer&Vibration）
Time setting 12H/24H mode switch
USB charging output External power input-DC 5V
12 13
14 15
16 17
9: Display Brightness Adjustment
Press SNOOZE button to adjust brightness of the LED display.
There are 4 brightness levels.
10: USB Charging
The USB charging port supports charging mobiles and supplies 1A
charging current.
Battery Operated Mode
When the device is powered by batteries only, the display will be
off in 10 seconds and the alarm will only sound for 3 minutes. USB
charging function does not work.
The battery life can last for one year normally.
We recommend the use of a long-life battery to ensure maximum
performance.
Power Adapter
Please make sure the power adapter is 5V 1.5A or above (Recom-
mend 5V 2A).
Restore Factory Settings
To restore factory settings, press TIME and button for 5 seconds
at the same time, after hearing DiDi sound, then all settings are
cleared.
- 8 -
◎V2 main unit ◎Micro USB power cord
◎User manual
◎Warranty card
- 4 -
◎Shaker
1
2
3
4
5
Features and Functions
1. Alarm: Easy operating, High/Medium/Low alarm volume, Snooze
2. Clock: Big LED screen to display,12/24 hour mode
3. 4 level dimmable
4. 5V 1A USB charging port
5. Standby mode
6. Dual Alarm Mode: Shaker/Ringtone
7. One touch to turn off the alarm
Included in this Package
(Please check the accessories included in this package after
purchasing)
Diagram of the LED Display & Controls
Display
AM/PM Snooze Alarm
Vibrating alarm Time display
1 2 3
4
5
1 pc
1 pc
1 pc
1 pc
1 pc
Operation Instruction
1:Turn on the Device & the Shaker
Connect the micro USB power cord with a 5V power adapter(Not
included) and push the micro USB terminal into the power input
port on the back of the device or install 3 AAA batteries(not
included). On battery mode, USB charging function can not work
and the LED display will turn to standby mode in 10 seconds.
Install 3 AAA batteries (not included) into the shaker to turn on the
shaker. The shaker is on when it vibrates a second. It will connect
with the device automatically as the shaker is paired with the
device before it leaves the factory. If fail to connect with the device,
please refer to the label on the bottom of the device.
2:Time Setting
Press TIME button on the back of the device, the time figure
begins to flash. Press+/-to select time by minute; Press and hold
+/- to select time quickly(Recommended). Press TIME button to
confirm time setting(If no operation on any keys in 10seconds, it
will confirm the setting and exit automatically ).
3:12H/24H Mode
Use the 12H/24H switch behind the unit to select 12 hour or 24
hour display. On 24H mode, AM or PM will display on the screen.
4:Alarm Setting
Press button to set alarm. 12:00 and the alarm icon begin to
flash on the screen. Press +/- button to select time by minute. Or
press and hold +/- button to select time quickly(Recommend).
Then press button to confirm the setting. The alarm icon will
stop flashing automatically in 10 seconds if no operation occurs.
If the alarm is not cancelled, the alarm works everyday.
- 6 - - 7 -
5:Turn off Alarm
When the alarm sounds, press and hold SNOOZE button to turn off
alarm. The alarm icon will display on the screen. Alarm will work in
the next day.
When the alarm sounds, press button, then alarm is cancelled.
The alarm icon disappears.
6:Alarm Mode Setting
Press ALARM MODE button on the back of the device to switch
buzzer,vibration and buzzer&vibration. The icon is for buzzer and
the icon is for vibrating alarm and the is for buzzer &
Vibration. If choosing vibration or buzzer & vibration alarm. If
choosing vibrating alarm, please make sure you have installed 3
AAA batteries(not included) inside the bed shaker.
The default alarm mode is buzzer & vibration.
7: Alarm Volume & Vibrating Level
On buzzer mode,press button to switch High(V3)/Medi-
um(V2)/Low(V1) alarm volume. The default volume is medium
volume. V1,V2 and V3 are the icons displaying on the screen.
Setting vibrating level is same as setting alarm volume.
8:Snooze
When the alarm sounds:
1:Press SNOOZE button to activate snooze function, snooze icon
Z is on, the alarm will activate again in 9 minutes. Press and
hold SNOOZE button to turn off snooze mode and snooze icon
Z disappears.
2:The alarm will sound for 30 minutes if no button is pressed, after
30 minutes, the alarm will be off automaticallyfor the day. The
alarm will work in the next day.
Z
Z
- 9 -
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
- 10 -
Shanghai Funner Electronic Technology Co.,Ltd
www.homtime.com

Summary

Safety Instructions

General Safety Precautions

Key safety warnings and precautions for using the alarm clock and bed shaker.

Operating Environment Restrictions

Product Storage and Usage Conditions

Conditions to avoid for optimal product performance and safety, including environmental factors.

Product Features and Package Contents

Key Features and Functions

Summary of alarm, clock, dimming, and USB charging functionalities.

Included Package Contents

List of items provided in the product packaging for user verification.

LED Display Diagram

Display Element Identification

Identification of all indicators and display elements on the alarm clock.

Device Controls

Top Panel Controls

Explanation of buttons and switches located on the top surface of the device.

Rear Panel Controls and Ports

Details of connections and switches on the back of the alarm clock.

Operation Instructions - Part 1

Device Power-On and Shaker Setup

Guide to connecting power and activating the device and shaker.

Setting Time and 12;24 Hour Mode

Steps for configuring the clock time and display format.

Alarm Setting Procedure

Instructions for setting the alarm time and enabling it.

Operation Instructions - Part 2

Alarm Management and Modes

How to turn off alarms, select modes, and adjust volume/vibration.

Snooze Functionality

Details on activating and deactivating the snooze feature during an alarm.

Operation Instructions - Part 3

Display Brightness and USB Charging

Adjusting screen brightness and utilizing the USB charging port.

Battery Operation and Power Adapter

Guidelines for battery use, life, and recommended power adapter specifications.

Restore Factory Settings

Procedure to reset the device to its original default configuration.

FCC Compliance Information

FCC Cautionary Statement

Regulatory information regarding device compliance and potential interference.

Overview

1. Safety Instructions
2. Environmental Conditions for Use
3. Features and Functions
4. Included in this Package
5. Diagram of the LED Display & Controls
6. Operation Instruction
7. Battery Operated Mode
8. Power Adapter
9. Restore Factory Settings
10. FCC Caution

This document describes the Homtime V2 Alarm Clock with Bed Shaker, a device designed to provide a versatile and reliable alarm experience. The manual emphasizes the importance of reading all safety and operation instructions thoroughly before use and retaining the handbook for future reference.

Safety Instructions

The manual begins with critical safety instructions, highlighting that ignoring them may lead to damage to persons and products. Users are advised to read the manual carefully, including safety instructions, parts instructions, and the operation manual. Key safety points include:

• Installing the product strictly according to the operation manual.
• Using only Homtime-recommended attachments, accessories, and replacement parts.
• Not opening or disassembling the product.
• Using the original power cord.
• Not placing items on the product or cord, and not bending, cutting off, or processing the cord.
• Not using with a damaged cord or plug.
• Disconnecting the power supply and cleaning the product with a dry cloth before cleaning.
• Suitable for dry locations only; not for outdoor use or wet surfaces.
• Not locating the product where it may fall into a bath or other water container.
• Not putting other parts into the product.
• Stopping use immediately if the product is damaged, smells, or smokes due to improper use.
• Being aware that product damage and data loss may occur if the product is clashed or dropped.
• Unplugging the power cord during thunderstorms or when not using the product for a long time.

The manual stresses that strict adherence to these instructions is crucial to prevent short circuits, electric shocks, fires, and other malfunctions. If the product malfunctions, users should contact technical support or an authorized service provider.

Environmental Conditions for Use

The Homtime V2 is a precise device and should not be stored or used under certain conditions:

• Vibrating or shocking places.
• Direct sunlight or high-temperature places.
• Wet and flooded places.
• Dusty places.
• Places with strong electromagnetic waves or electromagnetic force.
• Places with strong static.
• Conditions of high moisture.
• Close to radiators, electric heaters, or heat-generating devices.
• Applicable only for areas below 2000m above sea level.
• Applicable only for non-tropical climates.

Users are also warned not to step on the product or its cord and to consult their distributor for any questions regarding installation, operation, and safety. The manual concludes its introductory section by thanking the customer and reiterating the importance of reading the manual carefully.

Features and Functions

The Homtime V2 Alarm Clock offers a range of features:

1. Alarm: Easy operation with High/Medium/Low alarm volume.
2. Clock: Features a large LED screen with 12/24 hour mode display.
3. Dimmable: 4 levels of display brightness.
4. USB Charging Port: A 5V 1A USB charging port.
5. Standby Mode.
6. Dual Alarm Mode: Supports both Shaker and Ringtone alarms.
7. One-touch Alarm Off: Simple operation to turn off the alarm.

Included in this Package

The package includes:

• V2 main unit: 1 pc
• Shaker: 1 pc
• Micro USB power cord: 1 pc
• User manual: 1 pc
• Warranty card: 1 pc

Diagram of the LED Display & Controls

The LED display shows:

1. AM/PM indicator: For 12-hour mode.
2. Snooze icon.
3. Alarm icon.
4. Vibrating alarm icon.
5. Time display.

The top controls include: 6. + button: To adjust clock and alarm time. 7. SNOOZE | DIMMER button: For snooze function and LED dimming. 8. Volume button: To adjust alarm volume. 9. Alarm time setting button. 10. - button: To adjust clock and alarm time. 11. Alarm off button.

Controls on the back include: 12. Battery compartment. 13. Alarm mode switch: To select between Buzzer, Vibration, or Buzzer & Vibration. 14. Time setting button. 15. 12H/24H mode switch. 16. USB charging output port. 17. External power input-DC 5V.

Operation Instruction

1. Turn on the Device & the Shaker:

• Connect the micro USB power cord to a 5V power adapter (not included) and plug it into the power input port on the back.
• Alternatively, install 3 AAA batteries (not included). In battery mode, USB charging is disabled, and the LED display enters standby mode after 10 seconds.
• Install 3 AAA batteries (not included) into the shaker to activate it. The shaker vibrates for a second upon activation and automatically pairs with the device. If pairing fails, refer to the label on the bottom of the device.

2. Time Setting:

• Press the TIME button on the back; the time figure will flash.
• Use the +/- buttons to select time by minute. Press and hold +/- for faster selection.
• Press TIME again to confirm. If no operation occurs within 10 seconds, settings are confirmed automatically.

3. 12H/24H Mode:

• Use the 12H/24H switch on the back to select 12-hour or 24-hour display. AM/PM indicators appear in 24H mode.

4. Alarm Setting:

• Press the alarm button; "12:00" and the alarm icon will flash.
• Use +/- buttons to select the alarm time (press and hold for faster selection).
• Press the alarm button again to confirm. The alarm icon stops flashing after 10 seconds of inactivity. If not canceled, the alarm will activate daily.

5. Turn off Alarm:

• When the alarm sounds, press and hold the SNOOZE button to turn it off. The alarm icon will remain on, and the alarm will work the next day.
• To cancel the alarm completely, press the alarm off button when it sounds. The alarm icon will disappear.

6. Alarm Mode Setting:

• Press the ALARM MODE button on the back to switch between buzzer, vibration, or buzzer & vibration modes.
• The bell icon indicates buzzer mode, the vibration icon indicates vibrating alarm, and both icons indicate buzzer & vibration.
• For vibrating alarm, ensure 3 AAA batteries (not included) are installed in the bed shaker.
• The default alarm mode is buzzer & vibration.

7. Alarm Volume & Vibrating Level:

• In buzzer mode, press the volume button to switch between High (V3), Medium (V2), and Low (V1) alarm volumes. The default is medium. V1, V2, and V3 icons display on the screen.
• Setting the vibrating level follows the same procedure as setting alarm volume.

8. Snooze:

• When the alarm sounds:
  • Press the SNOOZE button to activate snooze; the Zz icon appears, and the alarm will sound again in 9 minutes. Press and hold SNOOZE to turn off snooze mode, and the Zz icon disappears.
  • If no button is pressed, the alarm will sound for 30 minutes and then turn off automatically for the day, resuming the next day.

9. Display Brightness Adjustment:

• Press the SNOOZE button to adjust the LED display brightness. There are 4 brightness levels.

10. USB Charging:

• The USB charging port supports charging mobile devices and provides 1A charging current.

Battery Operated Mode

• When powered by batteries only, the display turns off after 10 seconds, and the alarm sounds for only 3 minutes.
• USB charging functionality is disabled.
• Battery life can last up to one year.
• Long-life batteries are recommended for maximum performance.

Power Adapter

• Ensure the power adapter is 5V 1.5A or above (5V 2A recommended).

Restore Factory Settings

• To restore factory settings, press the TIME and alarm buttons simultaneously for 5 seconds. After hearing a "DiDi" sound, all settings will be cleared.

FCC Caution

The device complies with part 15 of the FCC Rules, meaning it will not cause harmful interference and must accept any interference received. Any unauthorized changes or modifications could void the user's authority to operate the equipment. The device is tested to comply with Class B digital device limits for residential installations, but if it causes harmful interference to radio or television reception, users are advised to:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a different circuit.
• Consult the dealer or an experienced radio/TV technician for help.

Homtime V2 Specifications

General

Brand	Homtime
Model	V2
Category	Alarm Clock
Language	English