19
DISPMODE D
(Character display)
The detailed information is displayed.
CH1 CH2
TOP : Measurement distance from the surface of the ultrasonic sensor
BOTTOM: Measurement level from B ZERO.
ZERO : B ZERO setting value
SPAN : Setting value of 100% level
% : Measurement ratio of the remaining amount
STC : STC setting value
T : Temperature inside of the tank
(The left one is the temperature inside of HD1200 main unit.)
Reset and system reset
All the settings of HD1200 main unit can be reset in the following procedures
at DISPMODE D.
Press ESC and MENU keys simultaneously to restart HD1200 main unit.
Press ESC, MENU and ← keys simultaneously to initialize HD1200 main unit.
(Approx. 1 min. will be taken to initialize HD1200 main unit.)
To Next Page
Loading...