Need help?Do you have a question about the Honda Power Products F560 and is the answer not in the manual?
General safety precautions to prevent accidents and injuries during use.
User's duties for safe operation, maintenance, and understanding controls.
Specific safety practices for operators, including awareness and proper attire.
Information on thrown object hazards and general safety advice.
Precautions regarding gasoline flammability, refueling, and hot engine/exhaust components.
Safety measures for carbon monoxide exposure and operating the tiller on slopes.
Warning about the danger of rotating tines and potential for serious injury.
Labels indicating caution for rotary parts and engine exhaust.
Labels directing users to the manual and warning about fuel hazards.
Details the location and components of the CE conformity mark on the tiller.
Identification of fuel tank cap, fuel gauge, and engine oil filler cap.
Identification of spark plug, stand, muffler, and tires.
Identification of throttle lever, main shift, and sub shift levers.
Identification of clutch levers, engine switch, adjusters, air cleaner, and choke lever.
Identification of transmission oil cap, hitch box, PTO shaft, and frame serial number.
Checking for leaks, flammable materials, and smooth operation of control levers.
Inspection of wiring, cables, and verifying normal engine operation and stopping.
Ensuring all bolts and nuts are tight and secure for safe operation.
Procedure for checking engine oil level and recommended oil specifications.
Checking transmission oil level and air cleaner element condition.
Checking fuel level, type of gasoline, and safe refueling practices.
Recommendations for storing gasoline and using gasohol, including warnings.
Verifying smooth operation of the main clutch and lock levers.
Importance of tire pressure and guidance on installing tools or attachments.
Setting fuel valve, choke, and engine switch for starting.
Using throttle, starter grip, and warming up the engine.
Guidance on operating the tiller at high altitudes and necessary carburetor modifications.
Adjusting the handlebar angle for operator comfort and control.
Adjusting and securing the handle column angle for heavy work.
Adjusting tilling depth using the hitch attachment and drag bars.
Adjusting handlebar height for operator stature and working conditions.
Procedures for engaging and disengaging the main clutch.
Using side clutches for directional control and associated warnings.
Instructions for shifting between forward, reverse, and neutral gears.
Information on PTO shaft use for stationary work and required safety measures.
Immediate action to stop the engine in emergency situations.
Standard procedure for safely stopping the engine during normal operation.
Moving throttle to low and setting shift lever to neutral before stopping.
Turning off the engine switch and fuel valve to complete shutdown.
Critical warnings and cautions before performing any maintenance tasks.
Table detailing service intervals for various tiller components.
Step-by-step guide for draining and refilling engine oil, including capacity.
Instructions for draining and refilling transmission oil, including capacity.
Procedure for cleaning or replacing the air cleaner element.
Instructions for cleaning the fuel sediment cup to ensure fuel system integrity.
Procedure for inspecting and cleaning the spark plug.
Detailed steps for measuring and adjusting the spark plug gap.
Proper procedure for installing and tightening the spark plug.
Cleaning the main clutch lever and lock lever for smooth operation.
Adjusting throttle cable freeplay for proper throttle lever response.
Adjusting side clutch cable freeplay for smooth clutch operation.
Safety measures to prevent fuel spillage and ignition during transport.
Steps for preparing the tiller for storage, including fuel and oil draining.
Diagnosing and resolving common problems when the engine fails to start.
Contact details for Honda distributors in various countries like Austria, France, Germany, etc.
CE conformity statements in French, Italian, German, Dutch, Swedish, Danish, Spanish, Greek, Romanian.
CE conformity statements in Lithuanian, Bulgarian, Norwegian, Turkish, Icelandic, Croatian, Slovak.
General| Type | Tiller |
|---|---|
| Engine | Honda GX160 |
| Displacement | 163 cc |
| Fuel Tank Capacity | 3.1 liters |
| Gears | 2 Forward, 1 Reverse |
| Starting System | Recoil |
| Engine Type | 4-stroke, OHV |
| Tilling Width | 90 cm |
| Transmission | Gear |
| Power Output | 4.8 hp |
To Next Page
