Need help?Do you have a question about the Honda 1989 PACIFIC COAST PC800 and is the answer not in the manual?
General| Year | 1989 |
|---|---|
| Make | Honda |
| Model | PACIFIC COAST PC800 |
| Category | Touring |
| Displacement | 800 cc |
| Compression Ratio | 9.0:1 |
| Ignition | Electronic |
| Transmission | 5-speed |
| Final Drive | Shaft |
| Front Suspension | Telescopic fork |
| Front Brake | Single disc |
| Front Tire | 120/80-17 |
| Rear Tire | 140/80-15 |
| Engine Type | 4-stroke, V-twin |
| Rear Brake | Single disc |
| Seat Height | 760 mm (29.9 in) |
| Torque | 69 Nm |
| Fuel System | Dual 34 mm CV carburetors |
Covers tire specifications, pressure, and windshield cleaning precautions.
Essential rules for safe motorcycle operation and rider visibility.
Guidelines on protective apparel and warnings about vehicle modifications.
Safe practices for adding accessories and carrying cargo.
Identifies controls on the left and right handlebars and dashboard.
Shows the location of key motorcycle components like the trunk and engine parts.
Explains the function of the speedometer, tachometer, and warning lights.
Adjusting rear suspension and maintenance for front/rear brakes.
Proper operation and maintenance of the clutch and cooling systems.
Guidelines for fuel types, refueling, and engine oil checks and recommendations.
Care and safety procedures for the final drive oil and tubeless tires.
Explanation of the ignition switch positions and key removal.
Details on right and left handlebar controls including engine stop, starter, headlight, and horn.
How to lock the steering and use the helmet holder.
Guidelines for using the trunk and fairing pockets, including weight limits.
Checklist for daily checks before riding the motorcycle.
Procedures for starting the engine and guidelines for the initial break-in period.
Techniques for safe riding, gear shifting, and effective braking.
Proper parking procedures and tips to deter motorcycle theft.
Important notes on vehicle care, service intervals, and using genuine parts.
Overview of scheduled maintenance tasks and a section for recording service history.
Contents of the tool kit and instructions for installing a license plate.
Location and recording of VIN, frame, engine numbers, and color information.
Step-by-step guide for changing engine oil and filter, including torque specs.
Procedures for removing and installing the air cleaner element.
Instructions for replacing spark plugs, including gap settings and torque.
Procedure for adjusting engine idle speed for optimal performance.
Steps for draining and refilling the final drive oil with recommended type and quantity.
Procedures for removing and installing the front wheel, including torque specifications.
Steps for removing and installing the rear wheel, with installation notes and torque values.
How to check front and rear brake pad and shoe wear using indicators.
Procedure to verify the proper operation of the side stand and its ignition cut-off system.
Information on the sealed battery type, handling precautions, and storage.
Steps for safely removing and reinstalling the motorcycle battery.
Guide for replacing main and other fuses, including location and safety warnings.
Instructions for cleaning the motorcycle body, windshield, and specific areas.
Proper methods for cleaning aluminum wheels to prevent corrosion and damage.
Steps for preparing the motorcycle for extended storage, including fluid changes and protection.
Steps to take when taking the motorcycle out of storage, including checks and initial ride.
Key physical measurements and weight of the motorcycle.
Fluid capacities, passenger limits, engine bore, stroke, and displacement.
Details on battery, generator, lights, and fuses.
Explanation of exhaust and noise emission control systems and their function.
Acts considered tampering with emission systems and common emission-related problems.
Information on warranty claims, dealer service, and customer support contact.
To Next Page