lO.Start the engine and set the
temperature control dial to
maximum. Add coolant to the
radiator up to the base of the filler
neck.
If
you
do
not have
the
proper coolant mixture available,
you can add plain water.
Remember to have the cooling
system drained and refilled with
the proper mixture as soon as you
can.
ll.Put
the radiator cap back on
tightly. Run the engine and watch
the temperature gauge.
If
it goes
back to the red mark, the engine
needs repair. (See
Emergency
Towing on page
238
.)
If
Your Engine Overheats
12.If the temperature stays normal,
check the coolant level in the
radiator reserve tank.
If
it has
gone down, add coolant to the
MAX
mark. Put the cap back on
tightly.
Taking
Care
of
the
Unexpected
225
To Next Page
Loading...
