−
−
You can store the
frequencies of your favorite radio
stations in the six preset buttons.
Each button will store one frequency
on the AM band, and two
frequencies on the FM band.
The SCAN function
samples all the stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. You will see SCAN in
the display. The system will scan up
the band for a station with a strong
signal. When it finds one, it will stop
and play that station for
approximately five seconds. If you do
nothing, the system will then scan
for the next strong station and play
that for five seconds. When it plays a
station that you want to continue
listening to, press the SCAN button
again.
Preset
SCAN
Audio System
Comfort and Convenience Features
94
SSCCAANN IINNDDIICCAATTOORR
AAMM//FFMM BBUUTTTTOONN SSCCAANN BBUUTTTTOONN
PPWWRR//VVOOLL KKNNOOBB
AAUUTTOO SSEELLEECCTT BBUUTTTTOONN
PPRREESSEETT BBUUTTTTOONNSS
SSEEEEKK//SSKKIIPP BBAARR
TTUUNNEE//MMOODDEE KKNNOOBB
SSTTEERREEOO IINNDDIICCAATTOORR
01/08/21 20:20:08 31S2A620_097
To Next Page