The following pages give general
guidelines for selecting and installing
child seats for infants and small
children.
To provide proper protection, a child
seat should meet three
requirements:
Childrenuptoaboutone
year old should be restrained in a
rear-facing, reclining child seat. Only
a rear-facing seat provides the
proper support to protect an infant’s
head, neck, and back. See page
for additional information on
protecting infants.
A child who is too
large for a rear-facing child seat, and
who can sit up without support,
should be restrained in a forward-
facing child seat. See page for
additional information on protecting
small children.
The child seat should
meet Federal Motor Vehicle
Safety Standard 213 (FMVSS 213)
or Canadian Motor Vehicle Safety
Standard 213 (CMVSS 213). Look
for the manufacturer’s statement
of compliance on the boxes.
38
34
Protecting Children
Driver and Passenger Safety
General Guidelines for Using
Child Seats
Selecting a Child Seat
The child seat should be of the
proper type and size to fit the child.
Infants: Small Children:
The child seat should meet safety
standards.
1.
2.
30
To Next Page
Loading...
Need help?
General
