Remove the old air cleaner
element.
Carefully clean the inside of the
air cleaner housing with a damp
rag.
Place the new air cleaner element
in the air cleaner housing.
Reinstall the air cleaner housing
cover. Tighten the four bolts.
Reinstall the clip on the cover.
Clamp the cable with the
connector.
Clean the hood latch assembly with a
mild cleaner, then lubricate it with a
multipurpose grease. Lubricate all
the moving parts (as shown),
including the pivot. Follow the time
and distance recommendations in
the Maintenance Schedule. If you
are not sure how to clean and grease
the latch, contact your Honda dealer.
3.
4.
6.
5.
Maintenance
Air Cleaner Element, Hood Latch
Hood Latch
298
AIR CLEANER ELEMENT
LATCH ASSEMBLY
To Next Page