The level of brightness is shown on
the multi-information display on the
Touring model or in the odometer/
trip meter display on LX and EX
models while you adjust it. It goes
out 5 seconds after you finish
adjusting.
The knob on the instrument panel
controls the brightness of the instru-
ment panel lights. Turn the knob to
adjust the brightness.
With the headlight switch off, the
high beam headlights and the high
beam indicator come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
switch off, even if you set the
parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
Instrument Panel BrightnessDaytime Running Lights
(Canadian Models)
Headlights, Instrument Panel Brightness
Instruments and Controls
125
BRIGHTNESS LEVEL
SELECT/RESET KNOB
Touring model shown
To Next Page
Loading...
Need help?
General
