The left and right halves can be
folded separately.
If you are folding the left half of
the seat, use the ignition key to
release the center seat belt from
thedetachableanchor(seepage
).
Lower the head restraint to its
lowest position.
Pull up the handle on the outside
of the seat-back.
Fold the seat-back forward.
To change the angle of the seats in
the second row seat-backs, pull up
the handle on the seat-back. Moving
the short vertical switch forward or
backward adjusts the seat back in
those directions.
To adjust the seats forward and
backward, pull up on the lever under
the seat cushion. After moving the
seat, make sure it is locked into
position.
The height of your driver’s seat is
adjustable. Turn the front dial on the
outside of the seat cushion to raise
the front of the seat bottom, and turn
the rear dial to raise the rear.
Reverse this procedure to return the
seat to its upright position. Make
sure the seat is locked and secured
before driving.
2.
3.
1.
4.
18
On LX models
Seats
Folding the Second Row SeatsAdjusting the Second Row SeatsDriver’s Seat Height Adjustment
Instruments and Controls
89
SECOND
ROW SEAT
０６／０６／３０ １７：５０：５５ ３１Ｓ９Ｖ６４０ ００９４
To Next Page