The outside mirrors are heated to
remove fog and frost. With the
ignition switch in the ON (II)
position, turn on the heaters by
pressing the button. The indicator in
the button comes on as a reminder.
Press the button again to turn the
heaters off.
Push the appropriate edge of the
adjustment switch to move the
mirrorright,left,up,ordown.
Move the selector switch to L
(driver’s side) or R (passenger’s
side).
Turn the ignition switch to the ON
(II) position.
When you finish, move the
selector switch to the center (off)
position. This turns the
adjustment switch off to keep your
settings.
1.
2.
3.
4.
If equipped
PowerMirrorHeatersAdjusting the Power Mirrors
Mirrors
Instruments and Controls
93
HEATED MIRROR BUTTON
ADJUSTMENT SWITCH
SELECTOR SWITCH
０６／０６／３０ １７：５１：２７ ３１Ｓ９Ｖ６４０ ００９８
To Next Page