Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Remove the head restraint (see
page ). Make sure the removed
head restraints are secured in the
cargo area, and reinstalled when
the child seat is removed.
Slide the anchor cover open.
Route the tether strap over the top
of the seat-back, making sure the
strap is not twisted.
Other LATCH-compatible seats have
a flexible-type connector as shown
above.
5.
4.
6.
7.
85
CONTINUED
Installing a Child Seat
Driver and Passenger Safety
47
TETHER ANCHOR
ANCHOR COVER
Flexible-type
０７／０４／２６ １８：４２：１９ ３１ＳＣＶ６５０ ００５２
To Next Page
Loading...
