245
Taking Care of the Unexpected
If the Transmission Is Not
Functioning Properly
Manual Shift (ESP) Mode:
Automatic Shift (AUTO) Mode:
If one or both shift switches do not function, stop riding your ATV in
the ESP mode. Switch to riding in the automatic shift mode.
Have your ATV inspected and repaired by your Honda dealer.
When the automatic transmission is not shifting properly, the gear
position indicator will show ‘‘- -’’ and blink.
See your Honda dealer to check and restore the automatic transmission.
If the gear position indicator shows ‘‘- -’’ and blinks while riding,
perform the following:
When the ‘‘- -’’ is blinking on the gear position indicator:
Restart the engine; drive the vehicle to a location where it can be loaded
and transported to a Honda dealer.
When the display on the gear position indicator returns to normal:
You may drive the vehicle as usual after restarting the engine.
However, we urge you to have your ATV inspected by your Honda
dealer.
Stop the ATV.
Turn the ignition switch to the OFF ( ) position.
After the engine stops, turn the ignition switch to the ON ( )
position.
Check the gear position indicator.
1.
2.
3.
4.
０８／０３／１８ １８：４９：４０ ３１ＨＮ２６８０ ０２５４
To Next Page
Loading...
Need help?
General
