Honda 2010 Civic Sedan User Manual

The fluid level should be between
theMINandMAXmarksontheside
of the reservoir. If the level is at or
below the MIN mark, your brake
system needs attention. Have the
brake system inspected for leaks or
worn brake pads.
The manual transmission should be
drained and refilled with new fluid
when this service is indicated by a
maintenance message on the
information display.
If you are not sure how to check and
add fluid, contact your dealer.
Brake fluid marked DOT 5 is not
compatible with your vehicle’s
braking system and can cause
extensive damage.
Using any non-Honda brake fluid can
cause corrosion and decrease the life
of the system. Have the brake
system flushed and refilled with
Honda Heavy Duty Brake Fluid
DOT 3 as soon as possible.
Always use Honda Heavy Duty
Brake Fluid DOT 3. If it is not
available, you should use only DOT 3
or DOT 4 fluid, from a sealed
container, as a temporary
replacement.
Replace the brake fluid according to
thetimerecommendationsinthe
maintenance minder schedule.
Check the brake fluid level in the
reservoirs monthly.
Brake SystemBrake and Clutch Fluid
Transmission Fluid, Brake and Clutch Fluid
300
MAX
MIN
09/07/02 17:18:53 31SNA640_305

Honda 2010 Civic Sedan Specifications

General

Brand	Honda
Model	2010 Civic Sedan
Category	Automobile
Language	English