Use the audio selector knob to make and enter selections.
Dialing a Number
Receiving a Call
Press the Hang-Up button to
end or decline the call.
1. Press the Pick-Up button to
go to the Phone screen.
2. Select Dial.
A notification is heard and the following screen appears:
Press the Pick-Up button to
accept the call.
3. Enter the phone number.
Select the green Dial icon or
press the Pick-Up button to call.
4. The call is connected and heard
through the vehicle speakers.
Use the audio selector knob to make and enter selections.
Pairing Your Phone (continued)
1. Press the Pick-Up button to
go to the Phone screen.
If your phone does not appear:
Select “Find Another Phone”
and search for HandsFreeLink
from your phone. Connect to
HFL.
Use this pairing method when a phone has already been paired to the system, or
when you want to pair an additional phone.
8. HFL gives you a four-digit
code. Enter it on your phone
when prompted. The phone is
now paired.
2. Select Phone Setup.
3. Select Connection.
4. Select Add a New Phone.
5. Select an empty location for
the phone.
If a prompt appears asking
to connect to a phone,
select No.
12 13
7. HFL searches for your phone.
Select your phone when it
appears on the list.
6. Make sure your phone is in
discovery mode, and select
Continue.
To Next Page
Loading...
Need help?
General
