Honda Accord 87 - User Manual

Details for identifying vehicle chassis and engine serial numbers.

Visual guide to where vehicle identification numbers are located on the car.

Information on the placement and meaning of various vehicle labels.

Specifies safe points for lifting and supporting the vehicle using hoists.

Instructions on using a floor jack for vehicle lifting and support.

Outlines important safety precautions and preparation steps before performing work.

Explains the meaning of various symbols used throughout the manual.

Lists and defines common abbreviations found in the manual.

Lists specialized tools required for engine removal and installation procedures.

Identifies specific tools needed for cylinder head and valve train servicing.

Details the special tools required for engine block maintenance and repair.

Lists specialized equipment for engine lubrication tasks.

Tools specifically for working on the fuel and emission control systems.

Special tools for the diagnosis and repair of the clutch system.

Tools necessary for the servicing of manual and automatic transmissions.

Specialized tools for differential and driveshaft maintenance.

Tools required for steering and suspension system repairs.

Lists specific tools for servicing the vehicle's brake systems.

Tools for bodywork and air conditioning system maintenance.

Lists additional tools that may be useful for specific tasks.

Provides standard measurements and acceptable service limits for components.

Detailed specifications and tolerances for engine block components.

Specifications related to the vehicle's cooling system operation.

Technical data for the fuel delivery and emission control systems.

Specifications and service limits for clutch system components.

Detailed specifications for manual and automatic transmission parts.

Technical data and limits for suspension system components.

Specifications and service limits for the vehicle's brake components.

Specifications for engine electrical system components.

General design dimensions and weights for different vehicle models.

Dimensional data and body specifications for sedan and aerodeck models.

Diagram and measurements for frame repair and alignment.

Identifies all lubrication points and the recommended lubricants.

Outlines the recommended service intervals for various maintenance tasks.

Step-by-step procedures for removing and installing the engine.

Detailed information on servicing the cylinder head and valve train components.

Instructions for working with the engine block, including illustrations.

Procedures for engine oil and oil filter replacement.

Covers the replacement and servicing of intake manifold and exhaust components.

Details on the conventional brake system, including inspection.

Information and procedures for the Anti-lock Brake System (ALB).

Instructions for replacing the high mount brake light assembly.

Wiring diagram and input test for the cruise control system.

Wiring diagram and input test for the wiper and washer systems.