Honda AFRICA TWIN User Manual (English)

To Next Page

AFRICA TWIN SOFTWARE UPDATE

FEBRUARY 2021 UPDATE—PC INSTRUCTIONS

WHAT YOU’LL NEED:

•

A USB 2.0 or higher ash drive with at least 512 MB capacity.

•

A computer with a high-speed Internet connection.

•

At least 15 minutes of time.

FORMAT THE DRIVE:

STEP ONE

Insert the USB drive into an available USB port on your computer.

STEP TWO

On your computer, locate the “Removable Disc” for the ash drive.

STEP THREE

Right-click and then select “Format” from the sub-menu.

STEP FOUR

Select “FAT32” from the le system.

STEP FIVE

Click “Start”, then click “OK” regarding delete contents prompt.

Note: this step will erase all existing content from the drive.

STEP SIX

Click “OK” after “Format Complete” message appears.

DOWNLOAD THE SOFTWARE:

STEP ONE

Download the software to your computer.

STEP TWO

Save the le (CRF1100_v3.10.update) to your computer. Do not change the le name.

STEP THREE

Copy the le (CRF1100_v3.10.update) onto your USB drive, without changing the le name.

STEP FOUR

Once the download is complete, remove the USB drive from your computer.

Need help?

Do you have a question about the Honda AFRICA TWIN and is the answer not in the manual?

Honda AFRICA TWIN Specifications

General

Engine Type	Liquid-cooled 4-stroke 8-valve Parallel Twin with 270° crank and Uni-cam
Compression Ratio	10.1:1
Fuel System	PGM-FI electronic fuel injection
Displacement	1084cc
Bore x Stroke	92 mm x 81.5 mm
Max Torque	105 Nm
Fuel Tank Capacity	24.8 L
Rear Brakes	256mm disc with single-piston caliper, ABS
Front Tire	90/90-21
Rear Tire	150/70-18
Seat Height	850 / 870 mm (adjustable)
Wheelbase	1575mm
Curb Weight	226 kg
Transmission	6-speed manual
Rear Suspension	Pro-Link with Showa gas-charged damper, adjustable preload and rebound damping