Need help?Do you have a question about the Honda CBF500/A and is the answer not in the manual?
General| Displacement | 499 cc |
|---|---|
| Transmission | 6-speed |
| Rear Brake | Single 240 mm disc with single-piston caliper |
| Bore x Stroke | 73.0 x 59.6 mm |
| Compression Ratio | 10.5:1 |
| Fuel System | PGM-FI electronic fuel injection |
| Ignition | Digital transistorized with electronic advance |
| Final Drive | Chain |
| Front Tire | 120/70-ZR17 |
| Fuel Capacity | 19 liters |
| Front Suspension | Telescopic fork |
| Front Brake | 296 mm single disc with dual-piston caliper |
| Dry Weight | 175 kg (386 lbs) |
| Rear Tire | 160/60 ZR17 |
| Width | 765 mm |
| Wheelbase | 1, 435 mm (56.5 in) |
Guidelines for motorcycle operator and passenger weight limits.
Emphasizes the critical importance of wearing an approved helmet.
Advises against exceeding personal abilities or riding beyond safe conditions.
Details the maximum weight capacity and cargo weight for the motorcycle.
Identifies and describes the various gauges and warning lights on the instrument panel.
Explains the adjustment of the rear shock absorber.
Instructions on checking the front brake fluid level.
Instructions on checking the rear brake fluid level.
Details the recommended coolant type and mixture for the engine.
Information on the fuel tank capacity and refueling procedure.
Procedure for checking and maintaining the engine oil level.
Guidance on maintaining correct tyre air pressure for safety and performance.
Details the functions of the engine stop switch and starter button.
Explains the headlight dimmer, passing light, turn signal, and horn controls.
Instructions on how to use the steering lock mechanism.
Procedure for removing and fitting the rider and pillion seats.
Essential checks to perform before riding the motorcycle.
Step-by-step guide for starting the motorcycle engine.
Important safety precautions to follow during maintenance tasks.
Procedure for checking and adjusting the drive chain slack.
Steps for removing the front wheel of the motorcycle.
Steps for removing the rear wheel of the motorcycle.
Location and procedure for replacing fuses in the fuse box.
Detailed steps for safely washing the motorcycle.
Procedure for preparing the motorcycle for extended storage.
Technical specifications for the motorcycle's dimensions.
Technical specifications for fluid capacities and weight.
Details bulb specifications for headlights, taillights, and signals.
To Next Page