Need help?Do you have a question about the Honda CBF190WH-G 2016 and is the answer not in the manual?
General| Displacement | 184.4 cc |
|---|---|
| Compression Ratio | 9.5:1 |
| Starter | Electric |
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Rear Suspension | Mono-shock |
| Front Brake | Single disc |
| Rear Brake | Drum |
| Front Tire | 110/70-17 |
| Rear Tire | 140/70-17 |
| Wheelbase | 1356 mm |
| Fuel Capacity | 12 L |
| Curb Weight | 140 kg |
| Engine Type | Single cylinder, 4-stroke, air-cooled |
| Fuel System | PGM-FI |
| Bore x Stroke | 61.0 mm x 63.1 mm |
Essential safety precautions and warnings for servicing the vehicle, emphasizing professional practices and hazard awareness.
Table of standard tightening torque values for various fasteners across different motorcycle sections and components.
Covers fuel line, fuel pump unit, fuel tank, fuel filter, and related supply tests for proper operation.
System diagram and procedures for checking engine oil level, oil changes, and oil strainer/filter maintenance.
Procedures for cylinder head service, including valve clearance adjustment, cover removal, and camshaft installation.
Instructions for servicing the cylinder and piston, including ring installation and inspection.
Procedures for servicing the crankcase, crankshaft, and balancer assembly, including inspection and sealing.
Detailed procedures for front fork disassembly, assembly, fluid replacement, and inspection.
Procedures for front brake system maintenance, including fluid replacement, caliper, and master cylinder service.
Procedures for rear brake system maintenance, including fluid replacement, caliper, and master cylinder service.
Overview of the PGM-FI system, including component locations, diagrams, and DTC troubleshooting.
Index of Diagnostic Trouble Codes (DTCs) for the PGM-FI system, listing failures, symptoms, and corresponding pages.
Information regarding the Engine Control Module (ECM), including power circuit and ground inspection.
Overview of the ignition system, including spark plug replacement, coil voltage inspection, and timing.
Information on the electrical starter system, including location, diagram, and troubleshooting for non-operation.
Overview of the battery and charging system, including location, diagram, and inspection.
To Next Page