Need help?Do you have a question about the Honda CBR250R and is the answer not in the manual?
General| Displacement | 249.6 cc |
|---|---|
| Compression Ratio | 10.7:1 |
| Ignition | Computer-controlled digital transistorized with electronic advance |
| Transmission | 6-speed |
| Final Drive | Chain |
| Front Tire | 110/70-17 |
| Rear Tire | 140/70-17 |
| Engine Type | Liquid-cooled single-cylinder four-stroke |
| Power | 26.5 hp @ 8, 500 rpm |
| Torque | 17.4 lb-ft @ 7, 000 rpm |
| Bore x Stroke | 76.0 mm x 55.0 mm |
| Fuel System | PGM-FI |
| Front Suspension | 37 mm telescopic fork |
| Rear Suspension | Pro-Link single shock |
| Front Brake | Single 296 mm disc with 2-piston caliper |
| Rear Brake | Single 220 mm disc with single-piston caliper |
| Length | 2, 030 mm (79.9 inches) |
| Ground Clearance | 145 mm (5.7 in) |
| Wheelbase | 1, 370 mm (53.9 in) |
| Fuel Capacity | 13 liters (3.4 gallons) |
| Curb Weight | 161 kg (355 lb) |
Key safety advice for motorcycle operation and rider protection.
Recommendations for choosing appropriate riding gear for safety.
Importance of helmets and eye protection for rider safety.
Recommendations for additional protective gear like boots and gloves.
Guidance on how weight affects safety and motorcycle handling.
Specifies the maximum weight capacity for the motorcycle.
Advice on securing cargo and riding with loads.
Recommendations for using genuine accessories and general guidelines.
Advice against modifications that affect safety or legality.
Details the functions of the multi-function display and its components.
Shows riding speed.
Shows accumulated mileage and trip mileage; includes reset function.
Indicates the coolant temperature and normal operating range.
Shows approximate available fuel in a graduated display.
Instructions on how to set the hour and minute on the digital clock.
Details the 5 adjustment positions for the shock absorber.
Explains front and rear brake fluid level checks and pad wear inspection.
Explains how to adjust clutch lever freeplay for proper operation.
Recommends specific coolant types and their properties.
Details fuel tank capacity and how to open/close the fuel fill cap.
Importance of proper tyre inflation for handling and safety.
Specifies recommended API classifications, viscosity, and types of engine oil.
Details the ignition switch positions and their functions.
Explains engine stop switch and start button functions.
Details headlight dimmer, passing light, turn signal, and horn controls.
Instructions on how to lock and unlock the steering.
Procedure for removing and installing the rear and front seats.
Location and use of the helmet holder, with safety warning.
Location of the document bag for storing the owner's manual and other documents.
Compartment for storing a U-shaped anti-theft lock.
Instructions for removing the right under cowl for servicing the oil filter.
Procedure for adjusting the headlight aim vertically.
Essential checks before each ride to ensure safety and proper function.
Proper starting procedures and precautions for the engine.
Guidance on proper riding during the initial 500 km for reliability.
Review of motorcycle safety and steps for smooth riding and gear shifting.
Instructions for proper braking techniques and safety reminders.
Explanation of the Combi Brake and Anti-lock Brake System (ABS).
Procedure for safely parking the motorcycle, including steering lock.
Advice on preventing motorcycle theft, including steering lock and additional devices.
Highlights the necessity of maintenance for safety, economy, and performance.
Safety precautions and warnings for performing maintenance tasks.
General safety measures to follow before and during maintenance.
Procedure for checking drive chain slack, wear, and lubrication.
Steps for adjusting drive chain slack and checking rear axle alignment.
Checks for chain wear using a label and arrow mark.
Procedure for cleaning and lubricating the drive chain and sprockets.
Steps for removing the front wheel, including safety precautions.
Steps for installing the front wheel, including torque specifications.
Steps for removing the rear wheel, including drive chain and axle removal.
Steps for installing the rear wheel, including drive chain and brake caliper alignment.
Checks wear indicator grooves and cutouts on front brake pads.
Checks wear indicator grooves on rear brake pads for wear.
Steps for removing the battery from the battery box.
Steps for installing the battery, including terminal connection order.
Procedure for replacing the headlight bulb.
Procedure for replacing position light bulbs.
Procedure for replacing brake and tail light bulbs.
Procedure for replacing front and rear turn signal bulbs.
Procedure for replacing the license light bulb.
Steps for washing the motorcycle, including cleaning agents and precautions.
Advice on drying, starting engine, testing brakes, and applying polish/wax.
Procedure for cleaning the motorcycle after exposure to salty water.
How to clean and protect painted aluminum wheels.
Instructions for cleaning mat painted surfaces with soft cloth and neutral detergent.
Advice on cleaning painted exhaust pipes and mufflers.
Steps for preparing the motorcycle for extended storage to prevent deterioration.
Personal safety, assessing damage, and seeking professional checks after a crash.
Lists overall dimensions and wheelbase of the motorcycle.
Details engine oil, fuel tank, and coolant capacities.
Lists primary reduction and gear ratios for power transmission.
Specifications for headlight, brake/tail, turn signal, position, and license lights.
Lists fuse ratings for main and other fuses.
To Next Page
