Need help?Do you have a question about the Honda CG150 Job and is the answer not in the manual?
General| Bore x Stroke | 57.3 mm x 57.8 mm |
|---|---|
| Compression Ratio | 9.0:1 |
| Fuel System | Carburetor |
| Ignition System | CDI |
| Transmission | 5-speed |
| Front Suspension | Telescopic fork |
| Rear Brake | Drum |
| Weight | 117 kg |
| Engine | 149.2 cc, OHC, single-cylinder, 4-stroke, air-cooled |
| Rear Suspension | Twin shock absorbers |
| Front Brake | Disc |
General information and congratulations on choosing a Honda motorcycle.
Recommendations for selecting and installing non-Honda accessories.
Essential rules to follow for safe motorcycle operation.
Specific load capacity for carrying pilot and passenger.
Guidance on how to distribute weight for optimal stability.
Diagrams showing the location of various motorcycle components.
Details on rear shock absorber adjustment and standard position.
Instructions for checking and adding brake fluid, including warnings.
Procedure for adjusting the front brake lever free play.
Steps to adjust the rear brake pedal height for the CG150 Sport model.
Procedure for adjusting rear brake pedal free play.
Steps to adjust clutch lever free play using cable adjusters.
Procedure for checking the engine oil level using the dipstick.
Tire size and cold tire pressure specifications for CG150 Titan KS/ES/ESD/CG150 Job models.
Checks for tire and rim condition, and recommendations for replacement.
Location, function, and key positions of the ignition switch.
Operation of the starter button for engine cranking.
How to adjust the headlight beam (high/low).
Operation of the turn signal switch for indicating turns.
How to operate the horn button.
Procedure for locking and unlocking the motorcycle's steering.
Location and operation of the helmet holder for security.
Steps to remove the right side cover for maintenance access.
Procedure for reinstalling the right side cover.
Steps to remove the left side cover for maintenance access.
Procedure for reinstalling the left side cover.
Essential checks to perform before riding the motorcycle for safety.
Procedure for starting the engine when it is cold.
Checks to perform before starting the engine.
Information on the plate identifying the motorcycle's manufacturing year.
Space to record the ignition key number for replacement purposes.
Schedule of recommended maintenance items and intervals for the motorcycle.
Procedure for changing engine oil and cleaning the oil strainer.
Procedure for checking drive chain slack and conditions.
Procedure for checking front fork assembly action and oil leakage.
Checks for swingarm bushings, rear shock absorbers, and suspension fasteners.
Checking wear indicator marks on front brake pads.
Steps to remove the front wheel, including disconnecting cables and nuts.
Steps to remove the front wheel, including disconnecting cables and nuts.
Steps to remove the rear wheel, including brake rod and axle nut.
Location and capacities of fuses specified for the motorcycle.
Steps to adjust the headlight case up or down.
How motorcycle condition and parts affect fuel economy.
How riding style impacts fuel economy.
How environmental factors influence fuel consumption.
Specifications for all motorcycle lighting components.
To Next Page
