Honda CLICK125 User Manual (English)

Questions and Answers:

D
Daniel RobbinsAug 13, 2025
Why Honda CLICK125 engine does not start even if the throttle is opened?
- S
  Sophia FryAug 13, 2025
  If the engine of your Honda Scooter fails to start even when you open the throttle, make sure the side stand is up. Restart the engine using the start button, following the correct starting procedure. Check the battery and battery terminals for any issues. If the battery is weak, contact your dealer. Also, ensure the Idling Stop switch is not engaged; if it is, disengage it by pressing the switch to the correct position.
J
Jake RodriguezAug 17, 2025
How to start Honda CLICK125 Scooter if engine will not start?
- M
  michael48Aug 17, 2025
  If the engine of your Honda Scooter is not starting, begin by ensuring you are using the correct engine starting procedure and that there is fuel in the tank. Also, inspect the battery connections for looseness or corrosion and assess the battery's overall condition. If the PGM-FI malfunction indicator lamp (MIL) is illuminated, it is recommended to contact your dealer immediately. For unresolved issues, seek professional inspection from your dealer.
A
Amber MontesAug 21, 2025
How to fix dead battery in Honda CLICK125?
- A
  agarzaAug 21, 2025
  To address a dead battery on your Honda Scooter, start by charging the battery using a motorcycle battery charger. If the battery fails to recover after recharging, it is recommended to contact your dealer for further assistance.
V
Victoria BanksAug 25, 2025
What to do if Honda CLICK125 engine is overheating?
- W
  William CarterAug 25, 2025
  If the engine of your Honda Scooter is overheating and the high coolant temperature indicator illuminates, immediately turn off the engine using the ignition switch and let it cool down with the switch in the Off position. Afterward, check the radiator hose for any leaks. If a leak is found, do not start the engine; transport your scooter to your dealer. Also, verify the coolant level in the reserve tank and add coolant if needed. If steps 1-4 check normal, you may continue riding, but closely monitor the high coolant temperature indicator.
M
Matthew SkinnerAug 28, 2025
What to do if PGM-FI malfunction indicator lamp (MIL) is on in Honda CLICK125?
- K
  Keith ChambersAug 28, 2025
  If the PGM-FI (Programmed Fuel Injection) malfunction indicator lamp illuminates while you are riding your Honda Scooter, reduce your speed and have your vehicle inspected by your dealer as soon as possible.
M
Marcia BellSep 1, 2025
Why Honda SMART Key indicator is flashing on my Honda CLICK125?
- K
  Katherine CarrollSep 1, 2025
  If the Honda SMART Key indicator is flashing, it might be due to strong radio waves or noise affecting the system. Ensure the Honda SMART Key system is activated by pressing the ON/OFF button lightly. If you lose the Honda SMART Key while riding, verify that a registered Honda SMART Key is being used.
J
Jeffery SimonSep 4, 2025
What to do if battery charging condition indicator is on in Honda CLICK125 Scooter?
- A
  Alexis DeckerSep 4, 2025
  If the Battery Charging Condition indicator comes on while riding your Honda Scooter, have your vehicle inspected by your dealer.
L
lauriewilliamsSep 8, 2025
Why idling stop indicator does not come on in Honda CLICK125?
- B
  Brittany SanchezSep 8, 2025
  If the Idling Stop Indicator on your Honda Scooter does not come on, ensure the Idling Stop switch is in the correct position. If the engine was started with the kickstarter, restart it using the start button. If the vehicle hasn't been ridden after starting, ride it at speeds over 10 km/h (6 mph). If the PGM-FI malfunction indicator lamp (MIL) is lit, consult your dealer. Low battery voltage can also prevent the indicator from activating; try riding the vehicle for a while, then stop and restart the engine with the start button. A cold engine may also be the cause; warm up the engine.

Honda CLICK125 Specifications

General

Fuel System	PGM-FI (Programmed Fuel Injection)
Starter System	Electric
Front Suspension	Telescopic Fork
Rear Brake	Mechanical Leading Trailing
Front Tire	80/90-14
Rear Tire	90/90-14
Seat Height	769 mm
Curb Weight	111 kg
Bore x Stroke	52.4 x 57.9 mm
Compression Ratio	11.0:1
Ignition System	Full Transistorized
Frame Type	Underbone
Wheelbase	1, 280 mm
Ground Clearance	132 mm
Max Torque	10.8 Nm @ 5, 000 rpm
Engine Type	4-stroke, SOHC
Transmission	V-Matic
Front Brake	Hydraulic Disc
Fuel Tank Capacity	5.5 liters
Max Power	8.3 kW @ 8, 500 rpm