Need help?Do you have a question about the Honda CMX 250 REBEL and is the answer not in the manual?
General| Starter | Electric |
|---|---|
| Transmission | 5-speed |
| Final Drive | O-ring-sealed chain |
| Front Brake | Single disc with twin-piston caliper |
| Rear Suspension Adjustability | Five-position spring preload adjustability |
Provides essential safety guidelines for operating and maintaining the vehicle.
Provides specific torque settings for various fasteners and components.
Provides a schedule for regular maintenance tasks based on mileage and time.
Details the procedure for checking and changing the engine oil.
Covers brake fluid type, replacement, and bleeding procedures.
Detailed steps for taking apart and putting back together the carburetor.
Step-by-step instructions for safely removing the engine from the frame.
Steps for reinstalling the engine into the motorcycle frame.
Steps for correctly installing the cylinder head and related components.
Guide for reinstalling the alternator and related parts.
Procedure for separating and reassembling the crankcase halves.
Instructions for removing, inspecting, and assembling the transmission components.
Steps for removing, inspecting, and installing the crankshaft.
Instructions for removing, disassembling, inspecting, and assembling the front forks.
Procedures for removing, replacing bearings, and installing the steering stem.
Guide for draining, filling, and bleeding the hydraulic brake system.
Procedures for removing, disassembling, and assembling the master cylinder.
Steps for removing, disassembling, inspecting, and assembling the brake caliper.
Covers removal, installation, and timing adjustment of the ignition coil.
Procedures for removing, disassembling, inspecting, and assembling the starter motor.
Diagnosing problems when the engine won't start or is hard to start.
To Next Page