To Next PageTo Next PageWhat to do if I am unable to start the app in my Honda Automobile?
If you are unable to start the app on your Honda Automobile, try reconnecting your smartphone, as the cable might not be connected properly.
How to fix frozen Honda CR-V 2016 Automobile sensor?
To thaw a frozen sensor on your Honda Automobile, melt the ice with lukewarm water.
Why Honda CR-V 2016 Automobile sensors not working in cold weather?
The backup sensors on your Honda Automobile may not function correctly if the outside air temperature is extremely cold (below -4°F or -20°C) or extremely hot (above 122°F or 50°C) due to extended parking.
How to clean Honda CR-V 2016 sensors?
To resolve a Honda Automobile sensor clogged with snow or mud, wipe it with a clean cloth or flush it with low-pressure water.
What to do if the connected USB device has a problem in my Honda Automobile?
If the connected USB device has a problem in your Honda Automobile, it could be due to several reasons: * The USB connector error occurs: Disconnect the iPod or the USB device from the USB connector, and reconnect them. Turn the audio system off, and turn it on again pressing the (Audio Power) Button. Set the Power Mode to OFF, and then turn the mode ON or ACCESSORY. If the error persists, contact your dealer. * An unsupported format device is connected: Check a supported format of the USB device. * The iPod version is not supported: Update your iPod to the latest version. * A connected device is not compatible with the USB connector: Connect a device compatible with the USB connector.
What to do if my Honda CR-V 2016 says an incompatible device is connected?
If an incompatible device is connected to your Honda Automobile, the overcurrent protection feature of the system stops supplying power to the USB. Disconnect the device, and turn the audio system off and on. Do not reconnect the device that caused the error.
How to turn off daylight saving time on my Honda Automobile?
To turn off the daylight saving time feature on your Honda Automobile, press the HOME button > Settings > Clock/Info > Clock tab, and set Auto Daylight to Off.
Why did the navigation system clock switch by one hour for no apparent reason in my Honda CR-V 2016 Automobile?
If the navigation system clock in your Honda Automobile switched by one hour for no apparent reason, it may be because you are driving near a time zone boundary.
Why is the multi-view rear camera image display delayed when I shift gears in my Honda CR-V 2016?
This is normal for Honda Automobile. When shifting into or out of Reverse, you may experience a delay while the screen image switches between the navigation screen and the multiview rear camera image.
What to do if my Honda CR-V 2016 Automobile system is unable to start due to excessive heat?
If your Honda Automobile system is unable to start due to excessive heat, it's because either the flash memory or the display temperature is too high. The system will automatically turn back on when the flash memory or the display cools down. If the error persists with the flash memory, contact your dealer.
General| Brand | Honda |
|---|---|
| Model | CR-V 2016 |
| Category | Automobile |
| Language | English |
Crucial safety warnings for operating the navigation system while driving.
How to use voice commands to control the audio system and related features.
Overview of the vehicle's audio system capabilities and features.
Explains how to interact with the system using voice commands via the Voice Portal.
Step-by-step guide on entering information using voice commands.
Describes how turn-by-turn directions are displayed and used during navigation.
Instructions on how to set and save home addresses for convenient navigation.
Explains how to view different route options and set route preferences.
Guide to adding intermediate stops to a planned route.
Provides assistance and lists available voice commands for system operation.
Details the initial procedure when turning on the navigation system.
Explains how to input commands and system feedback during voice control operation.
Manages stored addresses, including adding, editing, and organizing entries.
How to change settings that determine the navigation system's route calculation methods.
Allows selection of display modes for map and guidance screens.
Controls how the map is displayed, such as North-Up, Heading-Up, or 3D.
Steps to enter a destination by specifying its street address.
How to select a destination from stored addresses in the address book.
Step-by-step process to pair a Bluetooth®-compatible phone with the system.
Solutions for common problems related to map display, voice commands, and destination entry.
Lists common error messages for the navigation system and their solutions.
Covers the process of initializing the navigation system after power interruption.
Instructions for entering the security code to activate the system after initialization.
Commands that can be used from any screen to control system functions.
Voice commands specific to controlling navigation features and map display.
