Basic Operation & Riding 33
Starting & Stopping the Engine
If the engine fails to start after repeated
attempts, it may be flooded with excess fuel.
To clear a flooded engine:
1. Open the throttle fully.
2. Using The Start Button
Press the start button for 5 seconds.
Using The Kickstarter
Crank the engine several times with the kick-
starter.
3. Follow the normal engine starting procedure
(page 32).
Your motorcycle’s banking (lean angle) sensor
system is designed to automatically stop the
engine and fuel pump if the motorcycle is
overturned.
To stop the engine, shift into neutral, and turn
the ignition switch to the (OFF) position.
Flooded Engine Bank Angle Sensor Ignition Cut-off
System
How to Stop the Engine
To Next Page
Loading...
