Honda CRF150F 2018 User Manual

70
CRF230F
Bulb Replacement
(Refer to the Safety Precautions on page 39.)
The light bulb becomes very hot while the light is ON,
and remains hot for a while after it is turned OFF. Be
sure to let it cool down before servicing.
The lighting equipment is not legal for highway use.
Do not operate this motorcycle on public streets,
roads or highways.

Be sure to turn the ignition switch OFF when
replacing the bulb.

Do not use bulbs other than those specified.

After installing a new bulb, check that the light
operates properly.
Headlight Bulb
1. Remove the bolts (1) and headlight (2).
2. Pull back the rubber dust cover (3).
3. Slightly press the socket (4) and turn it
counterclockwise. Remove the bulb (5).
4. Install a new bulb and parts in the reverse order
of removal.

When installing the bulb, align the tab on the
bulb with the groove in the headlight.
(1) Bolts
(2) Headlight
(1)
(2)
(4)
(4) Rubber dust
cover
(5) Socket
(6) Bulb
(5)
(3)

Honda CRF150F 2018 Specifications

General

Engine Type	149cc air-cooled single-cylinder four-stroke
Bore x Stroke	57.3mm x 57.8mm
Compression Ratio	9.5:1
Ignition	CDI
Transmission	5-speed
Rear Brake	Drum
Front Tire	70/100-19
Rear Tire	90/100-16
Final Drive	Chain
Front Suspension	35mm Showa fork; 9.1 inches travel
Front Brake	Single disc
Fuel Capacity	1.6 gallons