Honda CRF450RWE 2023 User Manual

Blown Fuse
Before handling fuses, see “Inspecting and
Replacing Fuses.” 2 P. 48
1. Disconnect the negative - terminal.
2 P. 52
2.
Pull back the coupler cover.
3.
Disconnect the connector from the starter
magnetic switch.
4. Remove the starter magnetic switch stay
bolt.
5. Remove the starter magnetic switch
cover.
6. Pull the main fuse and check for a blown
fuse. Always replace a blown fuse with a
spare of the same rating.
20230714150511_42MKE6210_eng_BOOK Page 65 Friday, July 14 2023 15:07:32 JST
Electrical Trouble u Blown Fuse
Troubleshooting
58
Starter magnetic switch
Starter magnetic switch stay bolt
Starter magnetic
switch cover
Main fuse
Spare main fuse
Connector
Coupler cover

Honda CRF450RWE 2023 Specifications

General

Bore x Stroke	96.0mm x 62.1mm
Compression Ratio	13.5:1
Fuel System	Programmed Fuel Injection (PGM-FI), 46mm throttle body
Ignition	Full transistorized ignition
Starter	Electric
Transmission	5-speed
Final Drive	Chain
Rear Brake	Single 240mm disc
Front Tire	80/100-21
Rear Tire	120/80-19
Wheelbase	58.3 inches
Seat Height	37.8 inches
Engine Type	Liquid-cooled single-cylinder four-stroke
Valve Train	Unicam, 4-valve
Front Suspension	49mm inverted Showa coil-spring fork with rebound and compression damping adjustability
Rear Suspension	Showa Pro-Link system with rebound and compression damping adjustability; 12.4 inches travel
Front Brake	Single 260mm disc