Need help?Do you have a question about the Honda CT90 and is the answer not in the manual?
General| Bore x Stroke | 50.0 mm x 45.6 mm |
|---|---|
| Compression Ratio | 8.5:1 |
| Front Suspension | Telescopic fork |
| Front Brake | Drum |
| Rear Brake | Drum |
| Final Drive | Chain |
| Tires Front | 2.50-17 |
| Tires Rear | 2.50-17 |
| Engine Type | 4-stroke, single cylinder, OHV |
| Displacement | 89 cc |
| Seat Height | 780 mm (31 in) |
| Curb Weight | 85 kg (187 lbs) |
| Ignition | Magneto |
| Rear Suspension | Swingarm with dual shock absorbers |
Identifies the speedometer on the motorcycle.
Identifies the front brake lever.
Identifies the throttle grip.
Identifies the engine stop switch.
Identifies the headlight switch.
Identifies the rear brake pedal.
Identifies the foot rests.
Identifies the kick starter pedal.
Identifies the turn signal switch.
Identifies the handlebar clamp.
Identifies the ignition switch.
Identifies the gear change pedal.
Identifies the speedometer.
Identifies the odometer.
Identifies the neutral indicator light.
Identifies the high beam indicator light.
Identifies the turn signal indicator light.
Explains gear speed indicators.
Identifies the trip-meter.
Identifies the trip-meter reset knob.
Explains the ON and OFF states of the ignition switch.
Details the ON and OFF positions for the headlight switch.
Explains the function and correct placement of the engine stop switch.
How to operate the turn signal switch for left and right turns.
How to operate the headlight dimmer switch for low and high beams.
How to operate the horn switch.
How to lock and unlock the motorcycle's steering.
Instructions for using the helmet holder and warnings.
Details on the fuel filler cap, capacity, and fuel type.
Information on the auxiliary fuel tank's capacity and mounting.
Instructions for operating the fuel valve (ON, OFF, RES).
Guide to selecting the correct engine oil viscosity and grade.
How to adjust the handlebar for transporting the motorcycle.
Lists essential checks before riding the motorcycle.
Step-by-step instructions for starting the engine.
Guidelines for breaking in a new motorcycle engine.
Instructions on operating the throttle, shifting gears, and braking.
How to use the high-low speed range selector lever.
Procedure for checking the engine oil level.
Steps for changing engine oil and cleaning the oil filter.
Details on the specified spark plug and how to inspect it.
Procedure for checking and adjusting ignition timing.
How to check valve tappet clearance when the engine is cold.
Steps to adjust valve tappet clearance.
Steps for adjusting the cam chain tension.
Instructions for cleaning the air cleaner element.
How to check throttle grip operation and play.
Steps for adjusting the carburetor for idle speed and mixture.
Steps for cleaning the fuel filter.
Steps for adjusting the clutch for proper operation.
How to check and adjust drive chain tension.
How to lubricate the drive chain.
How to adjust the front brake lever free play.
How to adjust the rear brake pedal free play.
How to check brake pad wear using the indicator.
Steps for inspecting front and rear suspension components.
Step-by-step guide to removing the front wheel.
Step-by-step guide to removing the rear wheel.
How to inspect and top up the battery electrolyte level.
Recommended tire pressures and sizes.
How to adjust the stoplight switch timing.
Lists the items included in the motorcycle's tool kit.
To Next Page
