To install a LATCH-compatible child
seat:
Remove the plastic cover by
pulling it forward.
Make sure there are no foreign
objects around the anchors.
Foreign objects could get in the
way of a secure connection
between the child seat and the
anchors.
Put the child seat in the rear left
or right vehicle seat and attach the
child seat to the lower anchors
according to the child seat maker’s
instructions.
Follow the child seat maker’s
instructions for any additional
advice on adjusting or tightening
the fit.1.
2.
3. 4.
Protecting Children
Driver and Passenger Safety
48
Flexible type
Rigid type
To Next Page
Loading...
