Remove the head restraint (see
page ).
Make sure the removed head
restraints are secured in the cargo
area. Reinstall the head restraints
when the child seat is removed.
Attach the attaching clip to the
tether anchor fitting and tighten
the strap according to the child
seat maker’s instructions. Make
sure the strap is not twisted.
Push and pull the child seat
forward and from side to side to
verify that it is secure enough to
stay upright during normal driving
maneuvers.
This symbol on rear or forward
facing child seats or booster
cushions indicates the presence of
LATCH compatible hardware.
5. 6.
7.
94
Canadian model only
Protecting Children
Driver and Passenger Safety
Lower Universal Anchorage
System Symbol
49
To Next Page
Loading...
