−
179
Preparation for Storage
Storing Your Honda
Tips
Safety PrecautionsRefer to on page .
(cont’d)
Change the engine oil and filter (page ).
Make sure the cooling system is filled with a 50/50% antifreeze
solution (page ).
Fill the fuel tank. Make sure the fuel fill cap is properly installed.
To prevent rusting in the cylinder, perform the following:
Check that the fuel valve is OFF.
Remove the spark plug cap from the spark plug.
Remove the spark plug.
Do not connect the spark plug to the spark plug cap.
Pour a tablespoon (15 20 cc) of clean engine oil into the
cylinder and cover the spark plug hole with a piece of cloth.
With the engine stop switch in the RUN ( ) position, press the
start button several times to crank the engine and distribute the oil.
Reinstall the spark plug and spark plug cap.
1.
2.
3.
4.
5.
95
116
123
０８／０５／０６ １７：３１：２３ ３１ＨＰ７６００ ０１８８
To Next Page
Loading...
Need help?
General
