Honda FR750 - SERVICING YOUR HONDA TILLER; THE IMPORTANCE OF MAINTENANCE

SERVICING YOUR HONDA TILLER
THE IMPORTANCE OF MAINTENANCE
Good maintenance is essential for safe, economical, and trouble-free operation.
It will also help reduce air pollution.
To help you properly care for your tiller, the following pages include a
maintenance schedule, routine inspection procedures, and simple maintenance
procedures using basic hand tools. Other service tasks that are more difficult,
or require special tools, are best handled by professionals and are normally
performed by a Honda technician or other qualified mechanic.
The maintenance schedule applies to normal operating conditions. If you
operate your tiller under unusual conditions, (such as sustained high-load or
high-temperature operation, or use in dusty conditions), consult your servicing
dealer for recommendations applicable to your individual needs and use.
A WARNING
Improper maintenance, or failure to correcta
problem before operation, can cause a
malfunction in which you can be seriously
hurt or killed.
Always follow the inspection and
maintenance recommendations and
schedules in this owner’s manual.
Remember that your servicing dealer knows your tiller best and is fully
equipped to maintain and repair it.
To ensure the best quality and reliability, use only new, genuine Honda parts
or their equivalents for repair and replacement.
Maintenance, replacement, or repair of the emission control devices and
systems may be performed by any engine repair establishment or
individual, using parts that are “certified” to EPA standards.
24