Need help?Do you have a question about the Honda H3013H and is the answer not in the manual?
Operator duties for safe riding mower use, including pre-operation checks and personal alertness.
Precautions to prevent injury to children around the riding mower during operation and storage.
Operation of the engine start/stop switch and throttle for controlling mower functions.
How to raise, lower, and set the cutting height of the mower deck.
Operation of the shift lever for selecting forward, reverse, and neutral transmission positions.
Using the parking brake for safety and the warning buzzer system.
Guide to checking and maintaining the correct engine oil level for optimal performance and longevity.
Verifying fuel level and type, including safety warnings for gasoline.
Inspecting the air cleaner for airflow and checking the battery for electrolyte level.
Checking tire pressure and inspecting mower blades for damage or wear.
Testing safety interlocks like PTO and neutral switches for proper engine shut-off.
Step-by-step guide for safely starting the riding mower engine with necessary pre-checks.
Safe mowing techniques, tips for different conditions, and terrain considerations.
Recommended patterns for mowing small and large areas for a neat finish.
Safe procedures for stopping on hills and starting uphill to prevent tipping.
Guidelines for safely securing and transporting the riding mower, including cooling and tie-down methods.
A table outlining periodic service intervals and tasks for keeping the mower in good condition.
Step-by-step instructions for draining and refilling the engine oil with disposal guidance.
How to inspect, gap, clean, and replace the spark plug for efficient engine ignition.
Adjusting the blade belt tension and procedures for replacing worn or damaged belts.
Checking blade bolt torque and procedures for removing/installing mower blades.
Steps to prepare the riding mower for long-term storage, including draining fuel and oil.
Procedures to follow when taking the riding mower out of storage and preparing it for use.
Diagnosing and resolving common engine starting, power loss, and overheating problems.
Troubleshooting issues like mower not moving, vibration, uneven mowing, or clogged decks.
Diagnosing problems with battery charging, warning buzzers, fuses, and steering.
Addressing problems related to blades not rotating, deep cutting, or clogged discharge chutes.
Information on resolving issues and contacting customer service for warranty support.
Operator duties for safe riding mower use, including pre-operation checks and personal alertness.
Precautions to prevent injury to children around the riding mower during operation and storage.
Operation of the engine start/stop switch and throttle for controlling mower functions.
How to raise, lower, and set the cutting height of the mower deck.
Operation of the shift lever for selecting forward, reverse, and neutral transmission positions.
Using the parking brake for safety and the warning buzzer system.
Guide to checking and maintaining the correct engine oil level for optimal performance and longevity.
Verifying fuel level and type, including safety warnings for gasoline.
Inspecting the air cleaner for airflow and checking the battery for electrolyte level.
Checking tire pressure and inspecting mower blades for damage or wear.
Testing safety interlocks like PTO and neutral switches for proper engine shut-off.
Step-by-step guide for safely starting the riding mower engine with necessary pre-checks.
Safe mowing techniques, tips for different conditions, and terrain considerations.
Recommended patterns for mowing small and large areas for a neat finish.
Safe procedures for stopping on hills and starting uphill to prevent tipping.
Guidelines for safely securing and transporting the riding mower, including cooling and tie-down methods.
A table outlining periodic service intervals and tasks for keeping the mower in good condition.
Step-by-step instructions for draining and refilling the engine oil with disposal guidance.
How to inspect, gap, clean, and replace the spark plug for efficient engine ignition.
Adjusting the blade belt tension and procedures for replacing worn or damaged belts.
Checking blade bolt torque and procedures for removing/installing mower blades.
Steps to prepare the riding mower for long-term storage, including draining fuel and oil.
Procedures to follow when taking the riding mower out of storage and preparing it for use.
Diagnosing and resolving common engine starting, power loss, and overheating problems.
Troubleshooting issues like mower not moving, vibration, uneven mowing, or clogged decks.
Diagnosing problems with battery charging, warning buzzers, fuses, and steering.
Addressing problems related to blades not rotating, deep cutting, or clogged discharge chutes.
Information on resolving issues and contacting customer service for warranty support.
General| Type | Riding Lawn Mower |
|---|---|
| Engine | Honda GXV390 |
| Fuel Type | Gasoline |
| Displacement | 389 cc |
| Cylinders | 1 |
| Transmission | Hydrostatic |
| Blades | 2 |
| Cutting Width | 30 inches |
| Cutting Height | 1-4 inches |
To Next Page
