Honda HomeLink User Manual

Features
HomeLink® Universal Transceiver
*
The HomeLink® Universal Transceiver can be programmed to operate up to three
remote controlled devices around your home, such as garage doors, lighting, or
home security systems.
Refer to the safety information that came with your garage door opener to test that
the safety features are functioning properly. If you do not have the safety
information, contact the manufacturer.
Before programming HomeLink, make sure that people and objects are out of the
way of the garage or gate to prevent potential injury or damage.
When programming a garage door opener, park just outside the garage door’s path.
■
Important Safety Precautions
1HomeLink® Universal Transceiver
*
Before programming HomeLink to operate a garage
door opener, confirm that the opener has an external
entrapment protection system, such as an “electronic
eye,” or other safety and reverse stop features. If it
does not, HomeLink may not be able to operate it.
* Not available on all models

Honda HomeLink Specifications

General

Category	Transceiver
Power Source	Vehicle's electrical system
Number of Channels	3
Technology	Radio Frequency (RF)
Placement	Integrated into the vehicle's overhead console or sun visor
Compatibility	Compatible with most garage door openers, gate operators, and security systems. Rolling code and fixed code support.

Summary

Important Safety Precautions

Garage Door Opener Safety Check

Confirm garage door opener has an external entrapment protection system before programming HomeLink.

Training HomeLink

Erasing Learned Codes

Press and hold two outside buttons for 20 seconds until the red indicator blinks to erase previous codes.

Training a Button

Retraining a Button

Replace existing memory code by holding the desired HomeLink button until the indicator blinks.

Erasing All Codes

Erase all codes by pressing and holding the two outside buttons until the indicator blinks (10-20 secs).