Honda HR214 User Manual

3. Handle height adjustment
Adjust handle height for convenient m.owing.
. Loosen both sides of handle hook bolts.
. Swing the handle-up or down as required.
. After adjusting, make sure the handle hook bolts
are tightened securely.
4. Check the grass bag for fraying, tears and clogged
mesh. Wash the bag with water if necessary, and
let it dry thoroughly. Grass will not chute proper-
ly without adequate ventilation through the bag.
Make sure that the bag is properly installed.
5. Check the blade bolts for tightness.
Torque: 5.0-6.0 kg-m (36.2-43.4 ft-lb)
* To be certain that the engine will not start acciden-
tally, remove the spark plug cap before performing
this inspection.
6. Check the air cleaner element and clean it if it
is dirty (p. 28).
\
HANDLE HOOK BOLT
AIR
BAG
14

Honda HR214 Specifications

General

Cutting Width	21 inches
Cutting Height Range	1 to 3 inches
Grass Bag Capacity	2.5 bushels
Deck Material	Steel
Blade Type	Single blade
Starter System	Recoil
Engine Type	4-stroke, single cylinder, air-cooled
Drive Type	Self-propelled
Fuel Capacity	0.5 gallons
Fuel Tank Capacity	0.5 gallons
Mulching Capability	Yes
Oil Capacity	0.6 quarts
Engine	Honda GCV160