Name: Honda HR215KHMA
Brand: Honda
Rating: 5 (1 reviews)

To Next Page

To Previous Page

BEFORE OPERATION

CHECK YOUR MOWER

Blade

1. Move the throttle lever to the

STOP postion (see page 12).

2. On HR215HMA, turn the key to

the OFF position (see page 13).

3. Move the fuel valve to the OFF

position (see page 12).

4. Disconnect the spark plug cap

from the spark plug (see page

52).

5. Tilt the mower to the right, so

the carburetor side is up. This

will help to prevent fuel leakage

and hard starting.

6. Inspect the blade for wear and

damage.

NORMAL

EXCESSIVELY

WORN

BOLTS

A dull blade can be sharpened, but a blade that is worn out, bent,

cracked, or otherwise damaged must be replaced. A worn or damaged

blade can break, causing blade pieces to be thrown from the mower.

When the blade needs sharpening or replacement take the lawn

mower to an authorized Honda dealer. Or, if you have a torque

wrench, you can remove and install the blade yourself (see pages

62-63).

Check that the blade bolts are tight (see page 63).

Questions and Answers:

Need help?

Do you have a question about the Honda HR215KHMA and is the answer not in the manual?

Honda HR215KHMA Specifications

General