© 2017 American Honda Motor Co., Inc.—All rights reserved Page 2 of 2
First Issue Date: June 2017 PCI54823.2017.06
Cleaning the Docking Station
Unplug the transformer plug from the building’s power outlet
before cleaning the docking station.
Clean the docking station using a brush. Remove dirt and grass
from the docking station, particularly around the charging plug
area and parts where Miimo rests.
After Cleaning
After cleaning is complete, place Miimo back in the charging
station.
Reconnect the transformer plug to the building’s power outlet.
Turn Miimo ON, and then close the control panel cover.
Plug in the
transformer.
“ON” BUTTON
To Previous Page
Loading...
