254
Side Stand
Checking the Side Stand
1.
Check that the side stand operates
smoothly. If the side stand is stiff or
squeaky, clean the pivot area and lubricate
the pivot bolt with clean grease.
2.
Check the spring for damage or loss of
tension.
3.
Sit on the vehicle, shift the transmission to
Neutral, and raise the side stand.
Sit on the vehicle and raise the side stand.
4.
Start the engine, pull the clutch lever in,
and shift the transmission into gear.
Start the engine and press the side of
N-D switch to switch the transmission into
D mode.
5.
Lower the side stand all the way. The
engine should stop as you lower the side
stand. If the engine doesn't stop, have your
vehicle inspected by your dealer.
32MLF6000_eng.book Page 254 Wednesday, July 28, 2021 10:18 AM
To Next Page